You are here: IndustrialSafety.com > Manufacturers > Securall Flammable & Hazardous Storage Solutions
Featured Securall Storage Solution

Call or email us for a custom quote - 1-800-671-5080 or quotes@industrialsafety.com

HAZMAT STORAGE BUILDINGS

Specifically designed for hazardous material storage and dispensing from 55-gallon drums containing flammable or combustible liquids. Outer wall is constructed of all-welded 16 or 12 gauge steel. Inner wall is constructed of 20 gauge steel. The double wall construction contains 3" of air space throughout. All Hazmat Storage Buildings are designed in accordance with the standards set forth by NFPA Code 30 and comply with OSHA and EPA regulations. All models are FM Approved for the storing and dispensing of flammable and combustible liquids. Electrical installed in accordance with the NEC 2008 and 2011 editions and include UL Classified electrical accessories. Electrical Classification available at an additional charge. 



Easy To Ship Securall's Chemical Storage Buildings (B1200 and Below) are designed to fit in a standard high cube shipping container reducing shipping costs and labor time.

  CONSTRUCTION FEATURES
 
* Exterior Walls: (Models B200 through B1200) 16 gauge galvannealed steel.
* Interior Walls: 20-gauge galvannealed steel (3" air space between walls)
* Sump: 12-gauge steel liquid tight, continuously welded.
* Grating: Removable galvanized steel (Optional)
* Forklift channel: 12 gauge galvanized steel
* Grounding: OSHA Compliant Static ground connection inside and out on all explosion rated models
* Labeling: NFR warning label, Hazard Ratings System, Instructions
* Venting: Natural convection vents
* Explosion Relief Panels: 22 gauge steel opening protected by expanded steel
* Available with 2 or 4 hour fire rating
* Chemical/corrosive/ultraviolet resistant paint
* Removable galvanized steel safety floor planking

  TORNADO RESISTANT WALL
Exclusively SECURALL®  
SECURALL® Buildings have been tested to determine the amount of force they can withstand and were shown to withstand F-4 tornado force winds of 250 mph. The chart below demonstrates the wind speed that a particular length of wall will resist.

  EXTERIOR WALL CONSTRUCTION
Exclusively SECURALL®  
SECURALL® Hazamat Storage Buildings are all-welded using 12 gauge (B1600X-B8000X Models) and 16 gauge (B200X-B1200X Models) galvannealed steel outer walls and 20 gauge cold rolled steel inner walls provide maximum durability, weather resistance, and rigidity.

  FIRE RATING ACCORDING TO FM
Exclusively SECURALL®  

Industry's 1st & Only Intertek Tested and FM Approved 2 Hour Fire Rated wall construction built with 1.5 hour fire rated roof construction, 1.5 hour fire rated door construction, and multiple layers of ¾” gypsum ultracode wallboard. Air inlet vents with UL Listed and labeled fire damper with louvers. Dampers have a galvanized steel frame, curtain-type galvanized steel blades and a UL Listed 165° F fusible link.

Industry's 1st & Only Intertek Tested and FM Approved 4 Hour Fire Rated wall construction built with 3 hour fire rated roof construction, 3 hour fire rated door construction, and multiple layers of ¾” gypsum ultracode wallboard. Air inlet vents with UL Listed and labeled fire damper with louvers. Dampers have a galvanized steel frame, curtain-type galvanized steel blades and a UL Listed 165° F fusible link.

No Fire Rating : If a building is to be located more than 75 feet from a main buiding or property line, NO Fire Rating is required (Please check with your local authority having jurisdiction for setback requirements).

(Check with your local authority having jurisdiction for correct wall/roof rating needed)

  SAFETY FLOOR PLANKING
Exclusively SECURALL®  
Slip resistant planking 13" wide, 12 gauge galvanized steel with raised perforated buttons and debossed holes protruding down. Galvanized steel floor planking above sump area for maximum corrosion resistance. Floor planking designed to sustain a minimum uniformly distributed load of 250 pounds per square foot. Floor planking and supports are removable to facilitate sump cleaning in the event of a spill.

  EXPLOSION RELIEF PANEL
Exclusively SECURALL®  
Used in the construction of buildings designed to store Class IA and Class IB flammables. Explosion relief panels limit the damage within an enclosed hazardous location. When the panel(s) are subjected to an explosive force, the pressure relieving panel quickly vents the force before it causes major damage. The panels are designed to release at 20 psf.

  FACTORY MUTUAL SYSTEM APPROVAL
Exclusively SECURALL®  
Securall® Fire-Rated Hazardous Material Storage Buildings (10'H X 42'W X 9'D Max Dimensions) carry the Factory Mutual System Approval label and are constructed based upon UL Fire Resistance Ratings classification criteria. In addition, all Fire-Rated Buildings come with hydraulic operated self-closing, fire-rated doors and fire damper protected vents..