IndustrialSafety.com > Products > Hard Hats > 3M Hard Hats
We found 36 results matching your criteria.
Sort By:
Page of 2
3M H-801R Hard Hat Full Brim 4-Pt Ratchet White 3M H-801R Hard Hat Full Brim 4-Pt Ratchet White

Protective full brim hard hat with comfortable 4-point ratchet suspension and standard brow pad and Uvicator™ Sensor. Available in several colors. Meets requirements of ANSI/ISEA Z89.1-2014 Type 1, Class G and E.
  • Impact resistant, ANSI Type I hard hat wears lightweight and comfortable on the head
  • Comfortable suspension sits lower on head to reduce pressure points
  • Smooth, easy turning ratchet suspension is easy to adjust
  • 4-point ratchet suspension with three position height adjustment allows for customized fit
  • Uvicator™ sensor shows when it’s time to replace hard hat due to UV exposure
  • Meets requirements of ANSI/ISEA Z89.1-2014 Type 1, Class G and E

M™ H-800R-UV Series Full Brim Hard Hat with UVicator™ Sensor and Ratchet System is comfortable, tough and lightweight protective headgear that helps protect the head from small falling objects and fixed objects that may be bumped into. This hard hat comes with a Uvicator sensor that changes color as the hard hat is exposed to UV light. The sun’s UV rays can cause a hard hat shell to become brittle and compromise its ability to protect the wearer. With the Uvicator sensor, the hard hat should be replaced when the sun smart sensor changes from red to white. . The 4-point suspension system has unique features that allows for a customized height and fit that best suits the individual needs of the wearer. An optional 6-point suspension strap can be added for additional comfort and fit. The comfortable suspension sits lower on the head to reduce pressure points and increase security, especially when looking up and bending down. A smooth, easy-turning ratchet suspension allows for simple adjustments. A 3-level height adjustment allows workers to customize the fit. The perforated, absorbent brow pad provides enhanced comfort Besides head protection, full brim hard hats offer extra shielding from the sun, splashes, rain, sleet, and snow for enhanced comfort. Full brim hard hats are often preferred in hot and sunny locations because of the extra shading they provide. A hardhat is commonly worn in these industries: heavy and light industrial, construction, oil and gas, road work, utilities, forestry, and mining. This non-vented hard hat meets requirements of ANSI/ISEA Z89.1-2014 Type 1, Class G and E. The high visibility orange and high visibility yellow colored hard hats meet ANSI Z89.1-2014 High Visibility Performance requirements. The rigid shell of the 3M™ Hard Hat H-800 Series helps reduce chances of injury by deflecting small falling objects from striking the head of the person who wears this protective headgear.

Attributes

Category‎‎ Head Protection,‎ Head & Face Protection
Class‎‎ E,‎ G
Color‎‎ White
Dielectric‎‎ Class G and E
Features‎‎ Replaceable brow pad,‎ Uvicator,‎ Smooth easy turning 4-Point Ratchet Suspension
Material‎‎ HDPE
Product Series‎‎ Class G,‎ Class E
Product Type‎‎ Full Brim Hard Hats - Non-vented
Recommended Industry‎‎ Heavy Infrastructure,‎ Transportation,‎ Commercial buildings,‎ Construction,‎ Design & Construction,‎ Military Maintenance, Repair and Operation (MRO),‎ Mining,‎ Industrial Maintenance,‎ Metal Fabrication,‎ Oil & Gas,‎ General Manufacturing
Shelf Life‎‎ 5 Year
Standards/Approvals‎‎ ANSI Z87.1
Vented/Unvented‎‎ Unvented
Weight‎‎ 14.7 Ounce

Our Price: $11.64
3M H-802R Hard Hat Full Brim 4-Pt Ratchet Yellow 3M H-802R Hard Hat Full Brim 4-Pt Ratchet Yellow

Protective full brim hard hat with comfortable 4-point ratchet suspension, standard brow pad and Uvicator™ Sensor. Available in several colors. Meets requirements of ANSI/ISEA Z89.1-2014 Type 1, Class G and E.
  • Impact resistant, ANSI Type I hard hat wears lightweight and comfortable on the head
  • Comfortable suspension sits lower on head to reduce pressure points
  • Smooth, easy turning ratchet suspension is easy to adjust
  • 4-point ratchet suspension with three position height adjustment allows for customized fit
  • Uvicator™ sensor shows when it’s time to replace hard hat due to UV exposure
  • Meets requirements of ANSI/ISEA Z89.1-2014 Type 1, Class G and E

3M™ H-800R-UV Series Full Brim Hard Hat with UVicator™ Sensor and Ratchet System is comfortable, tough and lightweight protective headgear that helps protect the head from small falling objects and fixed objects that may be bumped into. This hard hat comes with a Uvicator sensor that changes color as the hard hat is exposed to UV light. The sun’s UV rays can cause a hard hat shell to become brittle and compromise its ability to protect the wearer. With the Uvicator sensor, the hard hat should be replaced when the sun smart sensor changes from red to white. . The 4-point suspension system has unique features that allows for a customized height and fit that best suits the individual needs of the wearer. An optional 6-point suspension strap can be added for additional comfort and fit. The comfortable suspension sits lower on the head to reduce pressure points and increase security, especially when looking up and bending down. A smooth, easy-turning ratchet suspension allows for simple adjustments. A 3-level height adjustment allows workers to customize the fit. The perforated, absorbent brow pad provides enhanced comfort Besides head protection, full brim hard hats offer extra shielding from the sun, splashes, rain, sleet, and snow for enhanced comfort. Full brim hard hats are often preferred in hot and sunny locations because of the extra shading they provide. A hardhat is commonly worn in these industries: heavy and light industrial, construction, oil and gas, road work, utilities, forestry, and mining. This non-vented hard hat meets requirements of ANSI/ISEA Z89.1-2014 Type 1, Class G and E. The high visibility orange and high visibility yellow colored hard hats meet ANSI Z89.1-2014 High Visibility Performance requirements. The rigid shell of the 3M™ Hard Hat H-800 Series helps reduce chances of injury by deflecting small falling objects from striking the head of the person who wears this protective headgear.

Attributes

Category‎‎ Head Protection,‎ Head & Face Protection
Class‎‎ E,‎ G
Color‎‎ Yellow
Dielectric‎‎ Class G and E
Features‎‎ Replaceable brow pad,‎ Uvicator,‎ Smooth easy turning 4-Point Ratchet Suspension
Material‎‎ HDPE
Product Series‎‎ Class G,‎ Class E
Product Type‎‎ Full Brim Hard Hats - Non-vented
Recommended Industry‎‎ Heavy Infrastructure,‎ Transportation,‎ Commercial buildings,‎ Construction,‎ Design & Construction,‎ Military Maintenance, Repair and Operation (MRO),‎ Mining,‎ Industrial Maintenance,‎ Metal Fabrication,‎ Oil & Gas,‎ General Manufacturing
Shelf Life‎‎ 5 Year
Standards/Approvals‎‎ ANSI Z87.1
Vented/Unvented‎‎ Unvented
Weight‎‎ 14.7 Ounce

Our Price: $11.64
3M H-803R Hard Hat Full Brim 4-Pt Ratchet Blue 3M H-803R Hard Hat Full Brim 4-Pt Ratchet Blue

Protective full brim hard hat with comfortable 4-point ratchet suspension and standard brow pad. Available in several colors. Meets requirements of ANSI/ISEA Z89.1-2014 Type 1, Class G and E.
  • Impact resistant, ANSI Type I hard hat wears lightweight and comfortable on the head
  • Comfortable suspension sits lower on head to reduce pressure points
  • 4-point ratchet suspension with three position height adjustment allows for customized fit
  • Smooth, easy turning ratchet suspension is easy to adjust
  • Absorbent brow pad adds cushioned, ventilated comfort
  • Meets requirements of ANSI/ISEA Z89.1-2014 Type 1, Class G and E.
  • Custom imprinting available.

3M™ H-800 Series Full Brim Hard Hat with Ratchet System is comfortable, tough and lightweight protective headgear that helps protect the head from small falling objects and fixed objects that may be bumped into. The 4-point suspension system has unique features that allows for a customized height and fit that best suits the individual needs of the wearer. An optional 6-point suspension strap can be added for additional comfort and fit. This comfortable suspension sits lower on the head to reduce pressure points and increase security, especially when looking up and bending down. A smooth, easy-turning ratchet suspension allows for simple adjustments. A 3-level height adjustment allows workers to customize the fit. The perforated, absorbent brow pad provides enhanced comfort Besides head protection, full brim hard hats offer extra shielding from the sun, splashes, rain, sleet, and snow for enhanced comfort. Full brim hard hats are often preferred in hot and sunny locations because of the extra shading they provide. A hardhat is commonly worn in these industries: heavy and light industrial, construction, oil and gas, road work, utilities, forestry, and mining. This non-vented hard hat meets requirements of ANSI/ISEA Z89.1-2014 Type 1, Class G and E. The high visibility orange and high visibility yellow colored hard hats meet ANSI Z89.1-2014 High Visibility Performance requirements. The rigid shell of the 3M™ Hard Hat H-800 Series helps reduce chances of injury by deflecting small falling objects from striking the head of the person who wears this protective headgear. The hard hat also helps protect from injuries due to bumping into stationary objects such as pipes, rods, shafts, construction timbers, branches, or exposed electrical conductors. The suspension system inside the hard hat helps absorb the effects of the impact to dissipate the force. Even small objects can cause significant injury due to the force built up from the momentum of falling.

Attributes

Category‎‎ Head Protection,‎ Head & Face Protection
Class‎‎ E,‎ G
Color‎‎ Blue
Dielectric‎‎ Class G and E
Features‎‎ Replaceable brow pad,‎ Smooth easy turning 4-Point Ratchet Suspension
Material‎‎ HDPE
Product Series‎‎ Class G,‎ Class E
Product Type‎‎ Full Brim Hard Hats - Non-vented
Recommended Industry‎‎ Heavy Infrastructure,‎ Transportation,‎ Commercial buildings,‎ Construction,‎ Design & Construction,‎ Military Maintenance, Repair and Operation (MRO),‎ Mining,‎ Industrial Maintenance,‎ Metal Fabrication,‎ Oil & Gas,‎ General Manufacturing
Shelf Life‎‎ 5 Year
Standards/Approvals‎‎ ANSI Z87.1
Vented/Unvented‎‎ Unvented
Weight‎‎ 14.7 Ounce

Our Price: $11.64
3M H-804R Hard Hat Full Brim 4-Pt Ratchet Green 3M H-804R Hard Hat Full Brim 4-Pt Ratchet Green

Protective full brim hard hat with comfortable 4-point ratchet suspension and standard brow pad. Available in several colors. Meets requirements of ANSI/ISEA Z89.1-2014 Type 1, Class G and E.
  • Impact resistant, ANSI Type I hard hat wears lightweight and comfortable on the head
  • Comfortable suspension sits lower on head to reduce pressure points
  • 4-point ratchet suspension with three position height adjustment allows for customized fit
  • Smooth, easy turning ratchet suspension is easy to adjust
  • Absorbent brow pad adds cushioned, ventilated comfort
  • Meets requirements of ANSI/ISEA Z89.1-2014 Type 1, Class G and E.
  • Custom imprinting available.

3M™ H-800 Series Full Brim Hard Hat with Ratchet System is comfortable, tough and lightweight protective headgear that helps protect the head from small falling objects and fixed objects that may be bumped into. The 4-point suspension system has unique features that allows for a customized height and fit that best suits the individual needs of the wearer. An optional 6-point suspension strap can be added for additional comfort and fit. This comfortable suspension sits lower on the head to reduce pressure points and increase security, especially when looking up and bending down. A smooth, easy-turning ratchet suspension allows for simple adjustments. A 3-level height adjustment allows workers to customize the fit. The perforated, absorbent brow pad provides enhanced comfort Besides head protection, full brim hard hats offer extra shielding from the sun, splashes, rain, sleet, and snow for enhanced comfort. Full brim hard hats are often preferred in hot and sunny locations because of the extra shading they provide. A hardhat is commonly worn in these industries: heavy and light industrial, construction, oil and gas, road work, utilities, forestry, and mining. This non-vented hard hat meets requirements of ANSI/ISEA Z89.1-2014 Type 1, Class G and E. The high visibility orange and high visibility yellow colored hard hats meet ANSI Z89.1-2014 High Visibility Performance requirements. The rigid shell of the 3M™ Hard Hat H-800 Series helps reduce chances of injury by deflecting small falling objects from striking the head of the person who wears this protective headgear. The hard hat also helps protect from injuries due to bumping into stationary objects such as pipes, rods, shafts, construction timbers, branches, or exposed electrical conductors. The suspension system inside the hard hat helps absorb the effects of the impact to dissipate the force. Even small objects can cause significant injury due to the force built up from the momentum of falling.

Attributes

Category‎‎ Head Protection,‎ Head & Face Protection
Class‎‎ E,‎ G
Color‎‎ Green
Dielectric‎‎ Class G and E
Features‎‎ Replaceable brow pad,‎ Smooth easy turning 4-Point Ratchet Suspension
Material‎‎ HDPE
Product Series‎‎ Class G,‎ Class E
Product Type‎‎ Full Brim Hard Hats - Non-vented
Recommended Industry‎‎ Heavy Infrastructure,‎ Transportation,‎ Commercial buildings,‎ Construction,‎ Design & Construction,‎ Military Maintenance, Repair and Operation (MRO),‎ Mining,‎ Industrial Maintenance,‎ Metal Fabrication,‎ Oil & Gas,‎ General Manufacturing
Shelf Life‎‎ 5 Year
Standards/Approvals‎‎ ANSI Z87.1
Vented/Unvented‎‎ Unvented
Weight‎‎ 14.7 Ounce

Our Price: $11.64
3M H-805R Hard Hat Full Brim 4-Pt Ratchet Red 3M H-805R Hard Hat Full Brim 4-Pt Ratchet Red

Protective full brim hard hat with comfortable 4-point ratchet suspension and standard brow pad. Available in several colors. Meets requirements of ANSI/ISEA Z89.1-2014 Type 1, Class G and E.
  • Impact resistant, ANSI Type I hard hat wears lightweight and comfortable on the head
  • Comfortable suspension sits lower on head to reduce pressure points
  • 4-point ratchet suspension with three position height adjustment allows for customized fit
  • Smooth, easy turning ratchet suspension is easy to adjust
  • Absorbent brow pad adds cushioned, ventilated comfort
  • Meets requirements of ANSI/ISEA Z89.1-2014 Type 1, Class G and E.
  • Custom imprinting available.

3M™ H-800 Series Full Brim Hard Hat with Ratchet System is comfortable, tough and lightweight protective headgear that helps protect the head from small falling objects and fixed objects that may be bumped into. The 4-point suspension system has unique features that allows for a customized height and fit that best suits the individual needs of the wearer. An optional 6-point suspension strap can be added for additional comfort and fit. This comfortable suspension sits lower on the head to reduce pressure points and increase security, especially when looking up and bending down. A smooth, easy-turning ratchet suspension allows for simple adjustments. A 3-level height adjustment allows workers to customize the fit. The perforated, absorbent brow pad provides enhanced comfort Besides head protection, full brim hard hats offer extra shielding from the sun, splashes, rain, sleet, and snow for enhanced comfort. Full brim hard hats are often preferred in hot and sunny locations because of the extra shading they provide. A hardhat is commonly worn in these industries: heavy and light industrial, construction, oil and gas, road work, utilities, forestry, and mining. This non-vented hard hat meets requirements of ANSI/ISEA Z89.1-2014 Type 1, Class G and E. The high visibility orange and high visibility yellow colored hard hats meet ANSI Z89.1-2014 High Visibility Performance requirements. The rigid shell of the 3M™ Hard Hat H-800 Series helps reduce chances of injury by deflecting small falling objects from striking the head of the person who wears this protective headgear. The hard hat also helps protect from injuries due to bumping into stationary objects such as pipes, rods, shafts, construction timbers, branches, or exposed electrical conductors. The suspension system inside the hard hat helps absorb the effects of the impact to dissipate the force. Even small objects can cause significant injury due to the force built up from the momentum of falling.

Attributes

Category‎‎ Head Protection,‎ Head & Face Protection
Class‎‎ E,‎ G
Color‎‎ Red
Dielectric‎‎ Class G and E
Features‎‎ Replaceable brow pad,‎ Smooth easy turning 4-Point Ratchet Suspension
Material‎‎ HDPE
Product Series‎‎ Class G,‎ Class E
Product Type‎‎ Full Brim Hard Hats - Non-vented
Recommended Industry‎‎ Heavy Infrastructure,‎ Transportation,‎ Commercial buildings,‎ Construction,‎ Design & Construction,‎ Military Maintenance, Repair and Operation (MRO),‎ Mining,‎ Industrial Maintenance,‎ Metal Fabrication,‎ Oil & Gas,‎ General Manufacturing
Shelf Life‎‎ 5 Year
Standards/Approvals‎‎ ANSI Z87.1
Vented/Unvented‎‎ Unvented
Weight‎‎ 14.7 Ounce

Our Price: $11.64
3M H-806R Hard Hat Full Brim 4-Pt Ratchet Orange 3M H-806R Hard Hat Full Brim 4-Pt Ratchet Orange

Protective full brim hard hat with comfortable 4-point ratchet suspension, standard brow pad and Uvicator™ Sensor. Available in several colors. Meets requirements of ANSI/ISEA Z89.1-2014 Type 1, Class G and E.
  • Impact resistant, ANSI Type I hard hat wears lightweight and comfortable on the head
  • Comfortable suspension sits lower on head to reduce pressure points
  • Smooth, easy turning ratchet suspension is easy to adjust
  • 4-point ratchet suspension with three position height adjustment allows for customized fit
  • Uvicator™ sensor shows when it’s time to replace hard hat due to UV exposure
  • Meets requirements of ANSI/ISEA Z89.1-2014 Type 1, Class G and E

3M™ H-800R-UV Series Full Brim Hard Hat with UVicator™ Sensor and Ratchet System is comfortable, tough and lightweight protective headgear that helps protect the head from small falling objects and fixed objects that may be bumped into. This hard hat comes with a Uvicator sensor that changes color as the hard hat is exposed to UV light. The sun’s UV rays can cause a hard hat shell to become brittle and compromise its ability to protect the wearer. With the Uvicator sensor, the hard hat should be replaced when the sun smart sensor changes from red to white. . The 4-point suspension system has unique features that allows for a customized height and fit that best suits the individual needs of the wearer. An optional 6-point suspension strap can be added for additional comfort and fit. The comfortable suspension sits lower on the head to reduce pressure points and increase security, especially when looking up and bending down. A smooth, easy-turning ratchet suspension allows for simple adjustments. A 3-level height adjustment allows workers to customize the fit. The perforated, absorbent brow pad provides enhanced comfort Besides head protection, full brim hard hats offer extra shielding from the sun, splashes, rain, sleet, and snow for enhanced comfort. Full brim hard hats are often preferred in hot and sunny locations because of the extra shading they provide. A hardhat is commonly worn in these industries: heavy and light industrial, construction, oil and gas, road work, utilities, forestry, and mining. This non-vented hard hat meets requirements of ANSI/ISEA Z89.1-2014 Type 1, Class G and E. The high visibility orange and high visibility yellow colored hard hats meet ANSI Z89.1-2014 High Visibility Performance requirements. The rigid shell of the 3M™ Hard Hat H-800 Series helps reduce chances of injury by deflecting small falling objects from striking the head of the person who wears this protective headgear.

Attributes

Category‎‎ Head Protection,‎ Head & Face Protection
Class‎‎ E,‎ G
Color‎‎ Orange
Dielectric‎‎ Class G and E
Features‎‎ Replaceable brow pad,‎ Uvicator,‎ Smooth easy turning 4-Point Ratchet Suspension
Material‎‎ HDPE
Product Series‎‎ Class G,‎ Class E
Product Type‎‎ Full Brim Hard Hats - Non-vented
Recommended Industry‎‎ Heavy Infrastructure,‎ Transportation,‎ Commercial buildings,‎ Construction,‎ Design & Construction,‎ Military Maintenance, Repair and Operation (MRO),‎ Mining,‎ Industrial Maintenance,‎ Metal Fabrication,‎ Oil & Gas,‎ General Manufacturing
Shelf Life‎‎ 5 Year
Standards/Approvals‎‎ ANSI Z87.1
Vented/Unvented‎‎ Unvented
Weight‎‎ 14.7 Ounce

Our Price: $11.64
3M H-807R Hard Hat Full Brim 4-Pt Ratchet Hi-Viz Orange 3M H-807R Hard Hat Full Brim 4-Pt Ratchet Hi-Viz Orange

Protective full brim hard hat with comfortable 4-point ratchet suspension and standard brow pad. Available in several colors. Meets requirements of ANSI/ISEA Z89.1-2014 Type 1, Class G and E.
  • Impact resistant, ANSI Type I hard hat wears lightweight and comfortable on the head
  • Comfortable suspension sits lower on head to reduce pressure points
  • 4-point ratchet suspension with three position height adjustment allows for customized fit
  • Smooth, easy turning ratchet suspension is easy to adjust
  • Absorbent brow pad adds cushioned, ventilated comfort
  • Meets requirements of ANSI/ISEA Z89.1-2014 Type 1, Class G and E.
  • Custom imprinting available.
  • High Visibility color meets ANSI Z89.1-2014 High Visibility Performance Requirements.

3M™ H-800 Series Full Brim Hard Hat with Ratchet System is comfortable, tough and lightweight protective headgear that helps protect the head from small falling objects and fixed objects that may be bumped into. The 4-point suspension system has unique features that allows for a customized height and fit that best suits the individual needs of the wearer. An optional 6-point suspension strap can be added for additional comfort and fit. This comfortable suspension sits lower on the head to reduce pressure points and increase security, especially when looking up and bending down. A smooth, easy-turning ratchet suspension allows for simple adjustments. A 3-level height adjustment allows workers to customize the fit. The perforated, absorbent brow pad provides enhanced comfort Besides head protection, full brim hard hats offer extra shielding from the sun, splashes, rain, sleet, and snow for enhanced comfort. Full brim hard hats are often preferred in hot and sunny locations because of the extra shading they provide. A hardhat is commonly worn in these industries: heavy and light industrial, construction, oil and gas, road work, utilities, forestry, and mining. This non-vented hard hat meets requirements of ANSI/ISEA Z89.1-2014 Type 1, Class G and E. The high visibility orange and high visibility yellow colored hard hats meet ANSI Z89.1-2014 High Visibility Performance requirements. The rigid shell of the 3M™ Hard Hat H-800 Series helps reduce chances of injury by deflecting small falling objects from striking the head of the person who wears this protective headgear. The hard hat also helps protect from injuries due to bumping into stationary objects such as pipes, rods, shafts, construction timbers, branches, or exposed electrical conductors. The suspension system inside the hard hat helps absorb the effects of the impact to dissipate the force. Even small objects can cause significant injury due to the force built up from the momentum of falling.

Attributes

Category‎‎ Head Protection,‎ Head & Face Protection
Class‎‎ E,‎ G
Color‎‎ Hi-Viz Orange
Dielectric‎‎ Class G and E
Features‎‎ Replaceable brow pad,‎ Smooth easy turning 4-Point Ratchet Suspension
Material‎‎ HDPE
Product Series‎‎ Class G,‎ Class E
Product Type‎‎ Full Brim Hard Hats - Non-vented
Recommended Industry‎‎ Heavy Infrastructure,‎ Transportation,‎ Commercial buildings,‎ Construction,‎ Design & Construction,‎ Military Maintenance, Repair and Operation (MRO),‎ Mining,‎ Industrial Maintenance,‎ Metal Fabrication,‎ Oil & Gas,‎ General Manufacturing
Shelf Life‎‎ 5 Year
Standards/Approvals‎‎ ANSI Z87.1
Vented/Unvented‎‎ Unvented
Weight‎‎ 14.7 Ounce

Our Price: $11.64
3M H-808R Hard Hat Full Brim 4-Pt Ratchet Gray 3M H-808R Hard Hat Full Brim 4-Pt Ratchet Gray

Protective full brim hard hat with comfortable 4-point ratchet suspension and standard brow pad. Available in several colors. Meets requirements of ANSI/ISEA Z89.1-2014 Type 1, Class G and E.
  • Impact resistant, ANSI Type I hard hat wears lightweight and comfortable on the head
  • Comfortable suspension sits lower on head to reduce pressure points
  • 4-point ratchet suspension with three position height adjustment allows for customized fit
  • Smooth, easy turning ratchet suspension is easy to adjust
  • Absorbent brow pad adds cushioned, ventilated comfort
  • Meets requirements of ANSI/ISEA Z89.1-2014 Type 1, Class G and E.
  • Custom imprinting available.

3M™ H-800 Series Full Brim Hard Hat with Ratchet System is comfortable, tough and lightweight protective headgear that helps protect the head from small falling objects and fixed objects that may be bumped into. The 4-point suspension system has unique features that allows for a customized height and fit that best suits the individual needs of the wearer. An optional 6-point suspension strap can be added for additional comfort and fit. This comfortable suspension sits lower on the head to reduce pressure points and increase security, especially when looking up and bending down. A smooth, easy-turning ratchet suspension allows for simple adjustments. A 3-level height adjustment allows workers to customize the fit. The perforated, absorbent brow pad provides enhanced comfort Besides head protection, full brim hard hats offer extra shielding from the sun, splashes, rain, sleet, and snow for enhanced comfort. Full brim hard hats are often preferred in hot and sunny locations because of the extra shading they provide. A hardhat is commonly worn in these industries: heavy and light industrial, construction, oil and gas, road work, utilities, forestry, and mining. This non-vented hard hat meets requirements of ANSI/ISEA Z89.1-2014 Type 1, Class G and E. The high visibility orange and high visibility yellow colored hard hats meet ANSI Z89.1-2014 High Visibility Performance requirements. The rigid shell of the 3M™ Hard Hat H-800 Series helps reduce chances of injury by deflecting small falling objects from striking the head of the person who wears this protective headgear. The hard hat also helps protect from injuries due to bumping into stationary objects such as pipes, rods, shafts, construction timbers, branches, or exposed electrical conductors. The suspension system inside the hard hat helps absorb the effects of the impact to dissipate the force. Even small objects can cause significant injury due to the force built up from the momentum of falling.

Attributes

Category‎‎ Head Protection,‎ Head & Face Protection
Class‎‎ E,‎ G
Color‎‎ Gray
Dielectric‎‎ Class G and E
Features‎‎ Replaceable brow pad,‎ Smooth easy turning 4-Point Ratchet Suspension
Material‎‎ HDPE
Product Series‎‎ Class G,‎ Class E
Product Type‎‎ Full Brim Hard Hats - Non-vented
Recommended Industry‎‎ Heavy Infrastructure,‎ Transportation,‎ Commercial buildings,‎ Construction,‎ Design & Construction,‎ Military Maintenance, Repair and Operation (MRO),‎ Mining,‎ Industrial Maintenance,‎ Metal Fabrication,‎ Oil & Gas,‎ General Manufacturing
Shelf Life‎‎ 5 Year
Standards/Approvals‎‎ ANSI Z87.1
Vented/Unvented‎‎ Unvented
Weight‎‎ 14.7 Ounce

Our Price: $11.64
3M H-809R Hard Hat Full Brim 4-Pt Ratchet Hi-Viz Yellow 3M H-809R Hard Hat Full Brim 4-Pt Ratchet Hi-Viz Yellow

Protective full brim hard hat with comfortable 4-point ratchet suspension, standard brow pad and Uvicator™ Sensor. Available in several colors. Meets requirements of ANSI/ISEA Z89.1-2014 Type 1, Class G and E.
  • Impact resistant, ANSI Type I hard hat wears lightweight and comfortable on the head
  • Comfortable suspension sits lower on head to reduce pressure points
  • Smooth, easy turning ratchet suspension is easy to adjust
  • 4-point ratchet suspension with three position height adjustment allows for customized fit
  • Uvicator™ sensor shows when it’s time to replace hard hat due to UV exposure
  • Meets requirements of ANSI/ISEA Z89.1-2014 Type 1, Class G and E
  • High Visibility color meets ANSI Z89.1-2014 High Visibility Performance Requirements.

3M™ H-800R-UV Series Full Brim Hard Hat with UVicator™ Sensor and Ratchet System is comfortable, tough and lightweight protective headgear that helps protect the head from small falling objects and fixed objects that may be bumped into. This hard hat comes with a Uvicator sensor that changes color as the hard hat is exposed to UV light. The sun’s UV rays can cause a hard hat shell to become brittle and compromise its ability to protect the wearer. With the Uvicator sensor, the hard hat should be replaced when the sun smart sensor changes from red to white. . The 4-point suspension system has unique features that allows for a customized height and fit that best suits the individual needs of the wearer. An optional 6-point suspension strap can be added for additional comfort and fit. The comfortable suspension sits lower on the head to reduce pressure points and increase security, especially when looking up and bending down. A smooth, easy-turning ratchet suspension allows for simple adjustments. A 3-level height adjustment allows workers to customize the fit. The perforated, absorbent brow pad provides enhanced comfort Besides head protection, full brim hard hats offer extra shielding from the sun, splashes, rain, sleet, and snow for enhanced comfort. Full brim hard hats are often preferred in hot and sunny locations because of the extra shading they provide. A hardhat is commonly worn in these industries: heavy and light industrial, construction, oil and gas, road work, utilities, forestry, and mining. This non-vented hard hat meets requirements of ANSI/ISEA Z89.1-2014 Type 1, Class G and E. The high visibility orange and high visibility yellow colored hard hats meet ANSI Z89.1-2014 High Visibility Performance requirements. The rigid shell of the 3M™ Hard Hat H-800 Series helps reduce chances of injury by deflecting small falling objects from striking the head of the person who wears this protective headgear.

Attributes

Category‎‎ Head Protection,‎ Head & Face Protection
Class‎‎ E,‎ G
Color‎‎ High Vis Yellow
Dielectric‎‎ Class G and E
Features‎‎ Replaceable brow pad,‎ Uvicator,‎ Smooth easy turning 4-Point Ratchet Suspension
Material‎‎ HDPE
Product Series‎‎ Class G,‎ Class E
Product Type‎‎ Full Brim Hard Hats - Non-vented
Recommended Industry‎‎ Heavy Infrastructure,‎ Transportation,‎ Commercial buildings,‎ Construction,‎ Design & Construction,‎ Military Maintenance, Repair and Operation (MRO),‎ Mining,‎ Industrial Maintenance,‎ Metal Fabrication,‎ Oil & Gas,‎ General Manufacturing
Shelf Life‎‎ 5 Year
Standards/Approvals‎‎ ANSI Z87.1
Vented/Unvented‎‎ Unvented
Weight‎‎ 14.7 Ounce

Our Price: $11.64
3M H-801V Hard Hat Full Brim Vent 4-Pt Ratchet White 3M H-801V Hard Hat Full Brim Vent 4-Pt Ratchet White

Protective full brim hard hat with vents and comfortable 4-point ratchet suspension and standard brow pad. Available in several colors. Meets requirements of ANSI/ISEA Z89.1-2014 Type 1, Class C.
  • Impact resistant, ANSI Type I hard hat wears lightweight and comfortable on the head
  • Comfortable suspension sits lower on head to reduce pressure points
  • Smooth, easy turning ratchet suspension is easy to adjust
  • 4-point ratchet suspension with three position height adjustment allows for customized fit
  • Vents allow air circulation to keep worker cooler and more comfortable
  • Meets requirements of ANSI/ISEA Z89.1-2014 Type 1, Class C

3M™ H-800V Series Full Brim Vented Hard Hat with Ratchet System is comfortable, tough and lightweight protective headgear that helps protect the head from small falling objects and fixed objects that may be bumped into. Vents built into the hard hat release heat buildup and allow air circulation to enhance comfort of the worker. The cooling effect of air circulation helps reduce perspiration in hot and humid working environments. The 4-point suspension system has unique features that allow for a customized height and fit that best suits the individual needs of the wearer. An optional 6-point suspension strap can be added for additional comfort and fit. The comfortable suspension sits lower on the head to reduce pressure points and increase security, especially when looking up and bending down. A smooth, easy-turning ratchet suspension allows for simple adjustments. A 3-level height adjustment allows workers to customize the fit. The perforated, absorbent brow pad provides enhanced comfort Besides head protection, full brim hard hats offer extra shielding from the sun, splashes, rain, sleet, and snow for enhanced comfort. Full brim hard hats are often preferred in hot and sunny locations because of the extra shading they provide. A hardhat is commonly worn in these industries: heavy and light industrial, construction, oil and gas, road work, utilities, forestry, and mining. This vented hard hat meets requirements of ANSI/ISEA Z89.1-2014 Type 1, Class C. The high visibility orange and high visibility yellow colored hard hats meet ANSI Z89.1-2014 High Visibility Performance requirements. The rigid shell of the 3M™ Hard Hat H-800 Series helps reduce chances of injury by deflecting small falling objects from striking the head of the person who wears this protective headgear. The hard hat also helps protect from injuries due to bumping into stationary objects such as pipes, rods, shafts, construction timbers, branches, or exposed electrical conductors.

Attributes

Category‎‎ Head Protection,‎ Head & Face Protection
Class‎‎ C
Color‎‎ White
Dielectric‎‎ Class C
Features‎‎ Replaceable brow pad,‎ Smooth easy turning 4-Point Ratchet Suspension
Material‎‎ HDPE
Product Series‎‎ Class C
Product Type‎‎ Full Brim Hard Hats - Vented
Recommended Industry‎‎ Heavy Infrastructure,‎ Transportation,‎ Commercial buildings,‎ Construction,‎ Design & Construction,‎ Military Maintenance, Repair and Operation (MRO),‎ Mining,‎ Industrial Maintenance,‎ Metal Fabrication,‎ Oil & Gas,‎ General Manufacturing
Shelf Life‎‎ 5 Year
Standards/Approvals‎‎ ANSI Z87.1
Vented/Unvented‎‎ Vented
Weight‎‎ 14.6 Ounce

Our Price: $12.21
3M H-802V Hard Hat Full Brim Vent 4-Pt Ratchet Yellow 3M H-802V Hard Hat Full Brim Vent 4-Pt Ratchet Yellow

Protective full brim hard hat with vents and comfortable 4-point ratchet suspension and standard brow pad. Available in several colors. Meets requirements of ANSI/ISEA Z89.1-2014 Type 1, Class C.
  • Impact resistant, ANSI Type I hard hat wears lightweight and comfortable on the head
  • Comfortable suspension sits lower on head to reduce pressure points
  • Smooth, easy turning ratchet suspension is easy to adjust
  • 4-point ratchet suspension with three position height adjustment allows for customized fit
  • Vents allow air circulation to keep worker cooler and more comfortable
  • Meets requirements of ANSI/ISEA Z89.1-2014 Type 1, Class C

3M™ H-800V Series Full Brim Vented Hard Hat with Ratchet System is comfortable, tough and lightweight protective headgear that helps protect the head from small falling objects and fixed objects that may be bumped into. Vents built into the hard hat release heat buildup and allow air circulation to enhance comfort of the worker. The cooling effect of air circulation helps reduce perspiration in hot and humid working environments. The 4-point suspension system has unique features that allow for a customized height and fit that best suits the individual needs of the wearer. An optional 6-point suspension strap can be added for additional comfort and fit. The comfortable suspension sits lower on the head to reduce pressure points and increase security, especially when looking up and bending down. A smooth, easy-turning ratchet suspension allows for simple adjustments. A 3-level height adjustment allows workers to customize the fit. The perforated, absorbent brow pad provides enhanced comfort Besides head protection, full brim hard hats offer extra shielding from the sun, splashes, rain, sleet, and snow for enhanced comfort. Full brim hard hats are often preferred in hot and sunny locations because of the extra shading they provide. A hardhat is commonly worn in these industries: heavy and light industrial, construction, oil and gas, road work, utilities, forestry, and mining. This vented hard hat meets requirements of ANSI/ISEA Z89.1-2014 Type 1, Class C. The high visibility orange and high visibility yellow colored hard hats meet ANSI Z89.1-2014 High Visibility Performance requirements. The rigid shell of the 3M™ Hard Hat H-800 Series helps reduce chances of injury by deflecting small falling objects from striking the head of the person who wears this protective headgear. The hard hat also helps protect from injuries due to bumping into stationary objects such as pipes, rods, shafts, construction timbers, branches, or exposed electrical conductors.

Attributes

Category‎‎ Head Protection,‎ Head & Face Protection
Class‎‎ C
Color‎‎ Yellow
Dielectric‎‎ Class C
Features‎‎ Replaceable brow pad,‎ Smooth easy turning 4-Point Ratchet Suspension
Material‎‎ HDPE
Product Series‎‎ Class C
Product Type‎‎ Full Brim Hard Hats - Vented
Recommended Industry‎‎ Heavy Infrastructure,‎ Transportation,‎ Commercial buildings,‎ Construction,‎ Design & Construction,‎ Military Maintenance, Repair and Operation (MRO),‎ Mining,‎ Industrial Maintenance,‎ Metal Fabrication,‎ Oil & Gas,‎ General Manufacturing
Shelf Life‎‎ 5 Year
Standards/Approvals‎‎ ANSI Z87.1
Vented/Unvented‎‎ Vented
Weight‎‎ 14.6 Ounce

Our Price: $12.21
3M H-803V Hard Hat Full Brim Vent 4-Pt Ratchet Blue 3M H-803V Hard Hat Full Brim Vent 4-Pt Ratchet Blue

Protective full brim hard hat with vents and comfortable 4-point ratchet suspension and standard brow pad. Available in several colors. Meets requirements of ANSI/ISEA Z89.1-2014 Type 1, Class C.
  • Impact resistant, ANSI Type I hard hat wears lightweight and comfortable on the head
  • Comfortable suspension sits lower on head to reduce pressure points
  • Smooth, easy turning ratchet suspension is easy to adjust
  • 4-point ratchet suspension with three position height adjustment allows for customized fit
  • Vents allow air circulation to keep worker cooler and more comfortable
  • Meets requirements of ANSI/ISEA Z89.1-2014 Type 1, Class C

3M™ H-800V Series Full Brim Vented Hard Hat with Ratchet System is comfortable, tough and lightweight protective headgear that helps protect the head from small falling objects and fixed objects that may be bumped into. Vents built into the hard hat release heat buildup and allow air circulation to enhance comfort of the worker. The cooling effect of air circulation helps reduce perspiration in hot and humid working environments. The 4-point suspension system has unique features that allow for a customized height and fit that best suits the individual needs of the wearer. An optional 6-point suspension strap can be added for additional comfort and fit. The comfortable suspension sits lower on the head to reduce pressure points and increase security, especially when looking up and bending down. A smooth, easy-turning ratchet suspension allows for simple adjustments. A 3-level height adjustment allows workers to customize the fit. The perforated, absorbent brow pad provides enhanced comfort Besides head protection, full brim hard hats offer extra shielding from the sun, splashes, rain, sleet, and snow for enhanced comfort. Full brim hard hats are often preferred in hot and sunny locations because of the extra shading they provide. A hardhat is commonly worn in these industries: heavy and light industrial, construction, oil and gas, road work, utilities, forestry, and mining. This vented hard hat meets requirements of ANSI/ISEA Z89.1-2014 Type 1, Class C. The high visibility orange and high visibility yellow colored hard hats meet ANSI Z89.1-2014 High Visibility Performance requirements. The rigid shell of the 3M™ Hard Hat H-800 Series helps reduce chances of injury by deflecting small falling objects from striking the head of the person who wears this protective headgear. The hard hat also helps protect from injuries due to bumping into stationary objects such as pipes, rods, shafts, construction timbers, branches, or exposed electrical conductors.

Attributes

Category‎‎ Head Protection,‎ Head & Face Protection
Class‎‎ C
Color‎‎ Blue
Dielectric‎‎ Class C
Features‎‎ Replaceable brow pad,‎ Smooth easy turning 4-Point Ratchet Suspension
Material‎‎ HDPE
Product Series‎‎ Class C
Product Type‎‎ Full Brim Hard Hats - Vented
Recommended Industry‎‎ Heavy Infrastructure,‎ Transportation,‎ Commercial buildings,‎ Construction,‎ Design & Construction,‎ Military Maintenance, Repair and Operation (MRO),‎ Mining,‎ Industrial Maintenance,‎ Metal Fabrication,‎ Oil & Gas,‎ General Manufacturing
Shelf Life‎‎ 5 Year
Standards/Approvals‎‎ ANSI Z87.1
Vented/Unvented‎‎ Vented
Weight‎‎ 14.6 Ounce

Our Price: $12.21
3M H-804V Hard Hat Full Brim Vent 4-Pt Ratchet Green 3M H-804V Hard Hat Full Brim Vent 4-Pt Ratchet Green

Protective full brim hard hat with vents and comfortable 4-point ratchet suspension and standard brow pad. Available in several colors. Meets requirements of ANSI/ISEA Z89.1-2014 Type 1, Class C.
  • Impact resistant, ANSI Type I hard hat wears lightweight and comfortable on the head
  • Comfortable suspension sits lower on head to reduce pressure points
  • Smooth, easy turning ratchet suspension is easy to adjust
  • 4-point ratchet suspension with three position height adjustment allows for customized fit
  • Vents allow air circulation to keep worker cooler and more comfortable
  • Meets requirements of ANSI/ISEA Z89.1-2014 Type 1, Class C

3M™ H-800V Series Full Brim Vented Hard Hat with Ratchet System is comfortable, tough and lightweight protective headgear that helps protect the head from small falling objects and fixed objects that may be bumped into. Vents built into the hard hat release heat buildup and allow air circulation to enhance comfort of the worker. The cooling effect of air circulation helps reduce perspiration in hot and humid working environments. The 4-point suspension system has unique features that allow for a customized height and fit that best suits the individual needs of the wearer. An optional 6-point suspension strap can be added for additional comfort and fit. The comfortable suspension sits lower on the head to reduce pressure points and increase security, especially when looking up and bending down. A smooth, easy-turning ratchet suspension allows for simple adjustments. A 3-level height adjustment allows workers to customize the fit. The perforated, absorbent brow pad provides enhanced comfort Besides head protection, full brim hard hats offer extra shielding from the sun, splashes, rain, sleet, and snow for enhanced comfort. Full brim hard hats are often preferred in hot and sunny locations because of the extra shading they provide. A hardhat is commonly worn in these industries: heavy and light industrial, construction, oil and gas, road work, utilities, forestry, and mining. This vented hard hat meets requirements of ANSI/ISEA Z89.1-2014 Type 1, Class C. The high visibility orange and high visibility yellow colored hard hats meet ANSI Z89.1-2014 High Visibility Performance requirements. The rigid shell of the 3M™ Hard Hat H-800 Series helps reduce chances of injury by deflecting small falling objects from striking the head of the person who wears this protective headgear. The hard hat also helps protect from injuries due to bumping into stationary objects such as pipes, rods, shafts, construction timbers, branches, or exposed electrical conductors.

Attributes

Category‎‎ Head Protection,‎ Head & Face Protection
Class‎‎ C
Color‎‎ Green
Dielectric‎‎ Class C
Features‎‎ Replaceable brow pad,‎ Smooth easy turning 4-Point Ratchet Suspension
Material‎‎ HDPE
Product Series‎‎ Class C
Product Type‎‎ Full Brim Hard Hats - Vented
Recommended Industry‎‎ Heavy Infrastructure,‎ Transportation,‎ Commercial buildings,‎ Construction,‎ Design & Construction,‎ Military Maintenance, Repair and Operation (MRO),‎ Mining,‎ Industrial Maintenance,‎ Metal Fabrication,‎ Oil & Gas,‎ General Manufacturing
Shelf Life‎‎ 5 Year
Standards/Approvals‎‎ ANSI Z87.1
Vented/Unvented‎‎ Vented
Weight‎‎ 14.6 Ounce

Our Price: $12.21
3M H-805V Hard Hat Full Brim Vent 4-Pt Ratchet Red 3M H-805V Hard Hat Full Brim Vent 4-Pt Ratchet Red

Protective full brim hard hat with vents and comfortable 4-point ratchet suspension and standard brow pad. Available in several colors. Meets requirements of ANSI/ISEA Z89.1-2014 Type 1, Class C.
  • Impact resistant, ANSI Type I hard hat wears lightweight and comfortable on the head
  • Comfortable suspension sits lower on head to reduce pressure points
  • Smooth, easy turning ratchet suspension is easy to adjust
  • 4-point ratchet suspension with three position height adjustment allows for customized fit
  • Vents allow air circulation to keep worker cooler and more comfortable
  • Meets requirements of ANSI/ISEA Z89.1-2014 Type 1, Class C

3M™ H-800V Series Full Brim Vented Hard Hat with Ratchet System is comfortable, tough and lightweight protective headgear that helps protect the head from small falling objects and fixed objects that may be bumped into. Vents built into the hard hat release heat buildup and allow air circulation to enhance comfort of the worker. The cooling effect of air circulation helps reduce perspiration in hot and humid working environments. The 4-point suspension system has unique features that allow for a customized height and fit that best suits the individual needs of the wearer. An optional 6-point suspension strap can be added for additional comfort and fit. The comfortable suspension sits lower on the head to reduce pressure points and increase security, especially when looking up and bending down. A smooth, easy-turning ratchet suspension allows for simple adjustments. A 3-level height adjustment allows workers to customize the fit. The perforated, absorbent brow pad provides enhanced comfort Besides head protection, full brim hard hats offer extra shielding from the sun, splashes, rain, sleet, and snow for enhanced comfort. Full brim hard hats are often preferred in hot and sunny locations because of the extra shading they provide. A hardhat is commonly worn in these industries: heavy and light industrial, construction, oil and gas, road work, utilities, forestry, and mining. This vented hard hat meets requirements of ANSI/ISEA Z89.1-2014 Type 1, Class C. The high visibility orange and high visibility yellow colored hard hats meet ANSI Z89.1-2014 High Visibility Performance requirements. The rigid shell of the 3M™ Hard Hat H-800 Series helps reduce chances of injury by deflecting small falling objects from striking the head of the person who wears this protective headgear. The hard hat also helps protect from injuries due to bumping into stationary objects such as pipes, rods, shafts, construction timbers, branches, or exposed electrical conductors.

Attributes

Category‎‎ Head Protection,‎ Head & Face Protection
Class‎‎ C
Color‎‎ Red
Dielectric‎‎ Class C
Features‎‎ Replaceable brow pad,‎ Smooth easy turning 4-Point Ratchet Suspension
Material‎‎ HDPE
Product Series‎‎ Class C
Product Type‎‎ Full Brim Hard Hats - Vented
Recommended Industry‎‎ Heavy Infrastructure,‎ Transportation,‎ Commercial buildings,‎ Construction,‎ Design & Construction,‎ Military Maintenance, Repair and Operation (MRO),‎ Mining,‎ Industrial Maintenance,‎ Metal Fabrication,‎ Oil & Gas,‎ General Manufacturing
Shelf Life‎‎ 5 Year
Standards/Approvals‎‎ ANSI Z87.1
Vented/Unvented‎‎ Vented
Weight‎‎ 14.6 Ounce

Our Price: $12.21
3M H-806V Hard Hat Full Brim Vent 4-Pt Ratchet Orange 3M H-806V Hard Hat Full Brim Vent 4-Pt Ratchet Orange

Protective full brim hard hat with vents and comfortable 4-point ratchet suspension and standard brow pad. Available in several colors. Meets requirements of ANSI/ISEA Z89.1-2014 Type 1, Class C.
  • Impact resistant, ANSI Type I hard hat wears lightweight and comfortable on the head
  • Comfortable suspension sits lower on head to reduce pressure points
  • Smooth, easy turning ratchet suspension is easy to adjust
  • 4-point ratchet suspension with three position height adjustment allows for customized fit
  • Vents allow air circulation to keep worker cooler and more comfortable
  • Meets requirements of ANSI/ISEA Z89.1-2014 Type 1, Class C


3M™ H-800V Series Full Brim Vented Hard Hat with Ratchet System is comfortable, tough and lightweight protective headgear that helps protect the head from small falling objects and fixed objects that may be bumped into. Vents built into the hard hat release heat buildup and allow air circulation to enhance comfort of the worker. The cooling effect of air circulation helps reduce perspiration in hot and humid working environments. The 4-point suspension system has unique features that allow for a customized height and fit that best suits the individual needs of the wearer. An optional 6-point suspension strap can be added for additional comfort and fit. The comfortable suspension sits lower on the head to reduce pressure points and increase security, especially when looking up and bending down. A smooth, easy-turning ratchet suspension allows for simple adjustments. A 3-level height adjustment allows workers to customize the fit. The perforated, absorbent brow pad provides enhanced comfort Besides head protection, full brim hard hats offer extra shielding from the sun, splashes, rain, sleet, and snow for enhanced comfort. Full brim hard hats are often preferred in hot and sunny locations because of the extra shading they provide. A hardhat is commonly worn in these industries: heavy and light industrial, construction, oil and gas, road work, utilities, forestry, and mining. This vented hard hat meets requirements of ANSI/ISEA Z89.1-2014 Type 1, Class C. The high visibility orange and high visibility yellow colored hard hats meet ANSI Z89.1-2014 High Visibility Performance requirements. The rigid shell of the 3M™ Hard Hat H-800 Series helps reduce chances of injury by deflecting small falling objects from striking the head of the person who wears this protective headgear. The hard hat also helps protect from injuries due to bumping into stationary objects such as pipes, rods, shafts, construction timbers, branches, or exposed electrical conductors.

Attributes

Category‎‎ Head Protection,‎ Head & Face Protection
Class‎‎ C
Color‎‎ Orange
Dielectric‎‎ Class C
Features‎‎ Replaceable brow pad,‎ Smooth easy turning 4-Point Ratchet Suspension
Material‎‎ HDPE
Product Series‎‎ Class C
Product Type‎‎ Full Brim Hard Hats - Vented
Recommended Industry‎‎ Heavy Infrastructure,‎ Transportation,‎ Commercial buildings,‎ Construction,‎ Design & Construction,‎ Military Maintenance, Repair and Operation (MRO),‎ Mining,‎ Industrial Maintenance,‎ Metal Fabrication,‎ Oil & Gas,‎ General Manufacturing
Shelf Life‎‎ 5 Year
Standards/Approvals‎‎ ANSI Z87.1
Vented/Unvented‎‎ Vented
Weight‎‎ 14.6 Ounce

Our Price: $12.21
3M H-807V Hard Hat Full Brim Vent 4-Pt Ratchet Hi-Viz Orange 3M H-807V Hard Hat Full Brim Vent 4-Pt Ratchet Hi-Viz Orange

Protective full brim hard hat with vents and comfortable 4-point ratchet suspension and standard brow pad. Available in several colors. Meets requirements of ANSI/ISEA Z89.1-2014 Type 1, Class C.
  • Impact resistant, ANSI Type I hard hat wears lightweight and comfortable on the head
  • Comfortable suspension sits lower on head to reduce pressure points
  • Smooth, easy turning ratchet suspension is easy to adjust
  • 4-point ratchet suspension with three position height adjustment allows for customized fit
  • Vents allow air circulation to keep worker cooler and more comfortable
  • Meets requirements of ANSI/ISEA Z89.1-2014 Type 1, Class C
  • High Visibility color meets ANSI Z89.1-2014 High Visibility Performance Requirements.

3M™ H-800V Series Full Brim Vented Hard Hat with Ratchet System is comfortable, tough and lightweight protective headgear that helps protect the head from small falling objects and fixed objects that may be bumped into. Vents built into the hard hat release heat buildup and allow air circulation to enhance comfort of the worker. The cooling effect of air circulation helps reduce perspiration in hot and humid working environments. The 4-point suspension system has unique features that allow for a customized height and fit that best suits the individual needs of the wearer. An optional 6-point suspension strap can be added for additional comfort and fit. The comfortable suspension sits lower on the head to reduce pressure points and increase security, especially when looking up and bending down. A smooth, easy-turning ratchet suspension allows for simple adjustments. A 3-level height adjustment allows workers to customize the fit. The perforated, absorbent brow pad provides enhanced comfort Besides head protection, full brim hard hats offer extra shielding from the sun, splashes, rain, sleet, and snow for enhanced comfort. Full brim hard hats are often preferred in hot and sunny locations because of the extra shading they provide. A hardhat is commonly worn in these industries: heavy and light industrial, construction, oil and gas, road work, utilities, forestry, and mining. This vented hard hat meets requirements of ANSI/ISEA Z89.1-2014 Type 1, Class C. The high visibility orange and high visibility yellow colored hard hats meet ANSI Z89.1-2014 High Visibility Performance requirements. The rigid shell of the 3M™ Hard Hat H-800 Series helps reduce chances of injury by deflecting small falling objects from striking the head of the person who wears this protective headgear. The hard hat also helps protect from injuries due to bumping into stationary objects such as pipes, rods, shafts, construction timbers, branches, or exposed electrical conductors.

Attributes

Category‎‎ Head Protection,‎ Head & Face Protection
Class‎‎ C
Color‎‎ Hi-Viz Orange
Dielectric‎‎ Class C
Features‎‎ Replaceable brow pad,‎ Smooth easy turning 4-Point Ratchet Suspension
Material‎‎ HDPE
Product Series‎‎ Class C
Product Type‎‎ Full Brim Hard Hats - Vented
Recommended Industry‎‎ Heavy Infrastructure,‎ Transportation,‎ Commercial buildings,‎ Construction,‎ Design & Construction,‎ Military Maintenance, Repair and Operation (MRO),‎ Mining,‎ Industrial Maintenance,‎ Metal Fabrication,‎ Oil & Gas,‎ General Manufacturing
Shelf Life‎‎ 5 Year
Standards/Approvals‎‎ ANSI Z87.1
Vented/Unvented‎‎ Vented
Weight‎‎ 14.6 Ounce

Our Price: $12.21
3M H-808V Hard Hat Full Brim Vent 4-Pt Ratchet Gray 3M H-808V Hard Hat Full Brim Vent 4-Pt Ratchet Gray

Protective full brim hard hat with comfortable 4-point ratchet suspension, standard brow pad and Uvicator™ Sensor. Available in several colors. Meets requirements of ANSI/ISEA Z89.1-2014 Type 1, Class G and E.
  • Impact resistant, ANSI Type I hard hat wears lightweight and comfortable on the head
  • Comfortable suspension sits lower on head to reduce pressure points
  • Smooth, easy turning ratchet suspension is easy to adjust
  • 4-point ratchet suspension with three position height adjustment allows for customized fit
  • Uvicator™ sensor shows when it’s time to replace hard hat due to UV exposure
  • Meets requirements of ANSI/ISEA Z89.1-2014 Type 1, Class G and E

3M™ H-800R-UV Series Full Brim Hard Hat with UVicator™ Sensor and Ratchet System is comfortable, tough and lightweight protective headgear that helps protect the head from small falling objects and fixed objects that may be bumped into. This hard hat comes with a Uvicator sensor that changes color as the hard hat is exposed to UV light. The sun’s UV rays can cause a hard hat shell to become brittle and compromise its ability to protect the wearer. With the Uvicator sensor, the hard hat should be replaced when the sun smart sensor changes from red to white. . The 4-point suspension system has unique features that allows for a customized height and fit that best suits the individual needs of the wearer. An optional 6-point suspension strap can be added for additional comfort and fit. The comfortable suspension sits lower on the head to reduce pressure points and increase security, especially when looking up and bending down. A smooth, easy-turning ratchet suspension allows for simple adjustments. A 3-level height adjustment allows workers to customize the fit. The perforated, absorbent brow pad provides enhanced comfort Besides head protection, full brim hard hats offer extra shielding from the sun, splashes, rain, sleet, and snow for enhanced comfort. Full brim hard hats are often preferred in hot and sunny locations because of the extra shading they provide. A hardhat is commonly worn in these industries: heavy and light industrial, construction, oil and gas, road work, utilities, forestry, and mining. This non-vented hard hat meets requirements of ANSI/ISEA Z89.1-2014 Type 1, Class G and E. The high visibility orange and high visibility yellow colored hard hats meet ANSI Z89.1-2014 High Visibility Performance requirements. The rigid shell of the 3M™ Hard Hat H-800 Series helps reduce chances of injury by deflecting small falling objects from striking the head of the person who wears this protective headgear.

Attributes

Category‎‎ Head Protection,‎ Head & Face Protection
Class‎‎ E,‎ G
Color‎‎ Gray
Dielectric‎‎ Class G and E
Features‎‎ Replaceable brow pad,‎ Uvicator,‎ Smooth easy turning 4-Point Ratchet Suspension
Material‎‎ HDPE
Product Series‎‎ Class G,‎ Class E
Product Type‎‎ Full Brim Hard Hats - Non-vented
Recommended Industry‎‎ Heavy Infrastructure,‎ Transportation,‎ Commercial buildings,‎ Construction,‎ Design & Construction,‎ Military Maintenance, Repair and Operation (MRO),‎ Mining,‎ Industrial Maintenance,‎ Metal Fabrication,‎ Oil & Gas,‎ General Manufacturing
Shelf Life‎‎ 5 Year
Standards/Approvals‎‎ ANSI Z87.1
Vented/Unvented‎‎ Unvented
Weight‎‎ 14.7 Ounce

Our Price: $12.21
3M H-809V Hard Hat Full Brim Vent 4-Pt Ratchet Hi-Viz Yellow 3M H-809V Hard Hat Full Brim Vent 4-Pt Ratchet Hi-Viz Yellow

Protective full brim hard hat with vents and comfortable 4-point ratchet suspension and standard brow pad. Available in several colors. Meets requirements of ANSI/ISEA Z89.1-2014 Type 1, Class C.
  • Impact resistant, ANSI Type I hard hat wears lightweight and comfortable on the head
  • Comfortable suspension sits lower on head to reduce pressure points
  • Smooth, easy turning ratchet suspension is easy to adjust
  • 4-point ratchet suspension with three position height adjustment allows for customized fit
  • Vents allow air circulation to keep worker cooler and more comfortable
  • Meets requirements of ANSI/ISEA Z89.1-2014 Type 1, Class C
  • High Visibility color meets ANSI Z89.1-2014 High Visibility Performance Requirements.

3M™ H-800V Series Full Brim Vented Hard Hat with Ratchet System is comfortable, tough and lightweight protective headgear that helps protect the head from small falling objects and fixed objects that may be bumped into. Vents built into the hard hat release heat buildup and allow air circulation to enhance comfort of the worker. The cooling effect of air circulation helps reduce perspiration in hot and humid working environments. The 4-point suspension system has unique features that allow for a customized height and fit that best suits the individual needs of the wearer. An optional 6-point suspension strap can be added for additional comfort and fit. The comfortable suspension sits lower on the head to reduce pressure points and increase security, especially when looking up and bending down. A smooth, easy-turning ratchet suspension allows for simple adjustments. A 3-level height adjustment allows workers to customize the fit. The perforated, absorbent brow pad provides enhanced comfort Besides head protection, full brim hard hats offer extra shielding from the sun, splashes, rain, sleet, and snow for enhanced comfort. Full brim hard hats are often preferred in hot and sunny locations because of the extra shading they provide. A hardhat is commonly worn in these industries: heavy and light industrial, construction, oil and gas, road work, utilities, forestry, and mining. This vented hard hat meets requirements of ANSI/ISEA Z89.1-2014 Type 1, Class C. The high visibility orange and high visibility yellow colored hard hats meet ANSI Z89.1-2014 High Visibility Performance requirements. The rigid shell of the 3M™ Hard Hat H-800 Series helps reduce chances of injury by deflecting small falling objects from striking the head of the person who wears this protective headgear. The hard hat also helps protect from injuries due to bumping into stationary objects such as pipes, rods, shafts, construction timbers, branches, or exposed electrical conductors.


Attributes

Category‎‎ Head Protection,‎ Head & Face Protection
Class‎‎ C
Color‎‎ High Vis Yellow
Dielectric‎‎ Class C
Features‎‎ Replaceable brow pad,‎ Smooth easy turning 4-Point Ratchet Suspension
Material‎‎ HDPE
Product Series‎‎ Class C
Product Type‎‎ Full Brim Hard Hats - Vented
Recommended Industry‎‎ Heavy Infrastructure,‎ Transportation,‎ Commercial buildings,‎ Construction,‎ Design & Construction,‎ Military Maintenance, Repair and Operation (MRO),‎ Mining,‎ Industrial Maintenance,‎ Metal Fabrication,‎ Oil & Gas,‎ General Manufacturing
Shelf Life‎‎ 5 Year
Standards/Approvals‎‎ ANSI Z87.1
Vented/Unvented‎‎ Vented
Weight‎‎ 14.6 Ounce

Our Price: $12.21
3M H-801R-Uv Hard Hat Full Brim 4-Pt Ratchet White 3M H-801R-Uv Hard Hat Full Brim 4-Pt Ratchet White

Protective full brim hard hat with comfortable 4-point ratchet suspension and standard brow pad and Uvicator™ Sensor. Available in several colors. Meets requirements of ANSI/ISEA Z89.1-2014 Type 1, Class G and E.
  • Impact resistant, ANSI Type I hard hat wears lightweight and comfortable on the head
  • Comfortable suspension sits lower on head to reduce pressure points
  • Smooth, easy turning ratchet suspension is easy to adjust
  • 4-point ratchet suspension with three position height adjustment allows for customized fit
  • Uvicator™ sensor shows when it’s time to replace hard hat due to UV exposure
  • Meets requirements of ANSI/ISEA Z89.1-2014 Type 1, Class G and E

3M™ H-800R-UV Series Full Brim Hard Hat with UVicator™ Sensor and Ratchet System is comfortable, tough and lightweight protective headgear that helps protect the head from small falling objects and fixed objects that may be bumped into. This hard hat comes with a Uvicator sensor that changes color as the hard hat is exposed to UV light. The sun’s UV rays can cause a hard hat shell to become brittle and compromise its ability to protect the wearer. With the Uvicator sensor, the hard hat should be replaced when the sun smart sensor changes from red to white. . The 4-point suspension system has unique features that allows for a customized height and fit that best suits the individual needs of the wearer. An optional 6-point suspension strap can be added for additional comfort and fit. The comfortable suspension sits lower on the head to reduce pressure points and increase security, especially when looking up and bending down. A smooth, easy-turning ratchet suspension allows for simple adjustments. A 3-level height adjustment allows workers to customize the fit. The perforated, absorbent brow pad provides enhanced comfort Besides head protection, full brim hard hats offer extra shielding from the sun, splashes, rain, sleet, and snow for enhanced comfort. Full brim hard hats are often preferred in hot and sunny locations because of the extra shading they provide. A hardhat is commonly worn in these industries: heavy and light industrial, construction, oil and gas, road work, utilities, forestry, and mining. This non-vented hard hat meets requirements of ANSI/ISEA Z89.1-2014 Type 1, Class G and E. The high visibility orange and high visibility yellow colored hard hats meet ANSI Z89.1-2014 High Visibility Performance requirements. The rigid shell of the 3M™ Hard Hat H-800 Series helps reduce chances of injury by deflecting small falling objects from striking the head of the person who wears this protective headgear.

Attributes

Category‎‎ Head Protection,‎ Head & Face Protection
Class‎‎ E,‎ G
Color‎‎ White
Dielectric‎‎ Class G and E
Features‎‎ Replaceable brow pad,‎ Uvicator,‎ Smooth easy turning 4-Point Ratchet Suspension
Material‎‎ HDPE
Product Series‎‎ Class G,‎ Class E
Product Type‎‎ Full Brim Hard Hats - Non-vented
Recommended Industry‎‎ Heavy Infrastructure,‎ Transportation,‎ Commercial buildings,‎ Construction,‎ Design & Construction,‎ Military Maintenance, Repair and Operation (MRO),‎ Mining,‎ Industrial Maintenance,‎ Metal Fabrication,‎ Oil & Gas,‎ General Manufacturing
Shelf Life‎‎ 5 Year
Standards/Approvals‎‎ ANSI Z87.1
Vented/Unvented‎‎ Unvented
Weight‎‎ 14.7 Ounce

Our Price: $13.51
3M H-804R-Uv Hard Hat Full Brim 4-Pt Ratchet Green 3M H-804R-Uv Hard Hat Full Brim 4-Pt Ratchet Green

Protective full brim hard hat with comfortable 4-point ratchet suspension, standard brow pad and Uvicator™ Sensor. Available in several colors. Meets requirements of ANSI/ISEA Z89.1-2014 Type 1, Class G and E.
  • Impact resistant, ANSI Type I hard hat wears lightweight and comfortable on the head
  • Comfortable suspension sits lower on head to reduce pressure points
  • Smooth, easy turning ratchet suspension is easy to adjust
  • 4-point ratchet suspension with three position height adjustment allows for customized fit
  • Uvicator™ sensor shows when it’s time to replace hard hat due to UV exposure
  • Meets requirements of ANSI/ISEA Z89.1-2014 Type 1, Class G and E

3M™ H-800R-UV Series Full Brim Hard Hat with UVicator™ Sensor and Ratchet System is comfortable, tough and lightweight protective headgear that helps protect the head from small falling objects and fixed objects that may be bumped into. This hard hat comes with a Uvicator sensor that changes color as the hard hat is exposed to UV light. The sun’s UV rays can cause a hard hat shell to become brittle and compromise its ability to protect the wearer. With the Uvicator sensor, the hard hat should be replaced when the sun smart sensor changes from red to white. . The 4-point suspension system has unique features that allows for a customized height and fit that best suits the individual needs of the wearer. An optional 6-point suspension strap can be added for additional comfort and fit. The comfortable suspension sits lower on the head to reduce pressure points and increase security, especially when looking up and bending down. A smooth, easy-turning ratchet suspension allows for simple adjustments. A 3-level height adjustment allows workers to customize the fit. The perforated, absorbent brow pad provides enhanced comfort Besides head protection, full brim hard hats offer extra shielding from the sun, splashes, rain, sleet, and snow for enhanced comfort. Full brim hard hats are often preferred in hot and sunny locations because of the extra shading they provide. A hardhat is commonly worn in these industries: heavy and light industrial, construction, oil and gas, road work, utilities, forestry, and mining. This non-vented hard hat meets requirements of ANSI/ISEA Z89.1-2014 Type 1, Class G and E. The high visibility orange and high visibility yellow colored hard hats meet ANSI Z89.1-2014 High Visibility Performance requirements. The rigid shell of the 3M™ Hard Hat H-800 Series helps reduce chances of injury by deflecting small falling objects from striking the head of the person who wears this protective headgear.

Attributes

Category‎‎ Head Protection,‎ Head & Face Protection
Class‎‎ E,‎ G
Color‎‎ Green
Dielectric‎‎ Class G and E
Features‎‎ Replaceable brow pad,‎ Uvicator,‎ Smooth easy turning 4-Point Ratchet Suspension
Material‎‎ HDPE
Product Series‎‎ Class G,‎ Class E
Product Type‎‎ Full Brim Hard Hats - Non-vented
Recommended Industry‎‎ Heavy Infrastructure,‎ Transportation,‎ Commercial buildings,‎ Construction,‎ Design & Construction,‎ Military Maintenance, Repair and Operation (MRO),‎ Mining,‎ Industrial Maintenance,‎ Metal Fabrication,‎ Oil & Gas,‎ General Manufacturing
Shelf Life‎‎ 5 Year
Standards/Approvals‎‎ ANSI Z87.1
Vented/Unvented‎‎ Unvented
Weight‎‎ 14.7 Ounce

Our Price: $13.51
3M H-808R-Uv Hard Hat Full Brim 4-Pt Ratchet Gray 3M H-808R-Uv Hard Hat Full Brim 4-Pt Ratchet Gray

Protective full brim hard hat with comfortable 4-point ratchet suspension, standard brow pad and Uvicator™ Sensor. Available in several colors. Meets requirements of ANSI/ISEA Z89.1-2014 Type 1, Class G and E.
  • Impact resistant, ANSI Type I hard hat wears lightweight and comfortable on the head
  • Comfortable suspension sits lower on head to reduce pressure points
  • Smooth, easy turning ratchet suspension is easy to adjust
  • 4-point ratchet suspension with three position height adjustment allows for customized fit
  • Uvicator™ sensor shows when it’s time to replace hard hat due to UV exposure
  • Meets requirements of ANSI/ISEA Z89.1-2014 Type 1, Class G and E

3M™ H-800R-UV Series Full Brim Hard Hat with UVicator™ Sensor and Ratchet System is comfortable, tough and lightweight protective headgear that helps protect the head from small falling objects and fixed objects that may be bumped into. This hard hat comes with a Uvicator sensor that changes color as the hard hat is exposed to UV light. The sun’s UV rays can cause a hard hat shell to become brittle and compromise its ability to protect the wearer. With the Uvicator sensor, the hard hat should be replaced when the sun smart sensor changes from red to white. . The 4-point suspension system has unique features that allows for a customized height and fit that best suits the individual needs of the wearer. An optional 6-point suspension strap can be added for additional comfort and fit. The comfortable suspension sits lower on the head to reduce pressure points and increase security, especially when looking up and bending down. A smooth, easy-turning ratchet suspension allows for simple adjustments. A 3-level height adjustment allows workers to customize the fit. The perforated, absorbent brow pad provides enhanced comfort Besides head protection, full brim hard hats offer extra shielding from the sun, splashes, rain, sleet, and snow for enhanced comfort. Full brim hard hats are often preferred in hot and sunny locations because of the extra shading they provide. A hardhat is commonly worn in these industries: heavy and light industrial, construction, oil and gas, road work, utilities, forestry, and mining. This non-vented hard hat meets requirements of ANSI/ISEA Z89.1-2014 Type 1, Class G and E. The high visibility orange and high visibility yellow colored hard hats meet ANSI Z89.1-2014 High Visibility Performance requirements. The rigid shell of the 3M™ Hard Hat H-800 Series helps reduce chances of injury by deflecting small falling objects from striking the head of the person who wears this protective headgear.

Attributes

Category‎‎ Head Protection,‎ Head & Face Protection
Class‎‎ E,‎ G
Color‎‎ Gray
Dielectric‎‎ Class G and E
Features‎‎ Replaceable brow pad,‎ Uvicator,‎ Smooth easy turning 4-Point Ratchet Suspension
Material‎‎ HDPE
Product Series‎‎ Class G,‎ Class E
Product Type‎‎ Full Brim Hard Hats - Non-vented
Recommended Industry‎‎ Heavy Infrastructure,‎ Transportation,‎ Commercial buildings,‎ Construction,‎ Design & Construction,‎ Military Maintenance, Repair and Operation (MRO),‎ Mining,‎ Industrial Maintenance,‎ Metal Fabrication,‎ Oil & Gas,‎ General Manufacturing
Shelf Life‎‎ 5 Year
Standards/Approvals‎‎ ANSI Z87.1
Vented/Unvented‎‎ Unvented
Weight‎‎ 14.7 Ounce

Our Price: $13.51
3M H-802R-Uv Hard Hat Full Brim 4-Pt Ratchet Yellow 3M H-802R-Uv Hard Hat Full Brim 4-Pt Ratchet Yellow

Protective full brim hard hat with comfortable 4-point ratchet suspension, standard brow pad and Uvicator™ Sensor. Available in several colors. Meets requirements of ANSI/ISEA Z89.1-2014 Type 1, Class G and E.
  • Impact resistant, ANSI Type I hard hat wears lightweight and comfortable on the head
  • Comfortable suspension sits lower on head to reduce pressure points
  • Smooth, easy turning ratchet suspension is easy to adjust
  • 4-point ratchet suspension with three position height adjustment allows for customized fit
  • Uvicator™ sensor shows when it’s time to replace hard hat due to UV exposure
  • Meets requirements of ANSI/ISEA Z89.1-2014 Type 1, Class G and E

3M™ H-800R-UV Series Full Brim Hard Hat with UVicator™ Sensor and Ratchet System is comfortable, tough and lightweight protective headgear that helps protect the head from small falling objects and fixed objects that may be bumped into. This hard hat comes with a Uvicator sensor that changes color as the hard hat is exposed to UV light. The sun’s UV rays can cause a hard hat shell to become brittle and compromise its ability to protect the wearer. With the Uvicator sensor, the hard hat should be replaced when the sun smart sensor changes from red to white. . The 4-point suspension system has unique features that allows for a customized height and fit that best suits the individual needs of the wearer. An optional 6-point suspension strap can be added for additional comfort and fit. The comfortable suspension sits lower on the head to reduce pressure points and increase security, especially when looking up and bending down. A smooth, easy-turning ratchet suspension allows for simple adjustments. A 3-level height adjustment allows workers to customize the fit. The perforated, absorbent brow pad provides enhanced comfort Besides head protection, full brim hard hats offer extra shielding from the sun, splashes, rain, sleet, and snow for enhanced comfort. Full brim hard hats are often preferred in hot and sunny locations because of the extra shading they provide. A hardhat is commonly worn in these industries: heavy and light industrial, construction, oil and gas, road work, utilities, forestry, and mining. This non-vented hard hat meets requirements of ANSI/ISEA Z89.1-2014 Type 1, Class G and E. The high visibility orange and high visibility yellow colored hard hats meet ANSI Z89.1-2014 High Visibility Performance requirements. The rigid shell of the 3M™ Hard Hat H-800 Series helps reduce chances of injury by deflecting small falling objects from striking the head of the person who wears this protective headgear.

Attributes

Category‎‎ Head Protection,‎ Head & Face Protection
Class‎‎ E,‎ G
Color‎‎ Yellow
Dielectric‎‎ Class G and E
Features‎‎ Replaceable brow pad,‎ Uvicator,‎ Smooth easy turning 4-Point Ratchet Suspension
Material‎‎ HDPE
Product Series‎‎ Class G,‎ Class E
Product Type‎‎ Full Brim Hard Hats - Non-vented
Recommended Industry‎‎ Heavy Infrastructure,‎ Transportation,‎ Commercial buildings,‎ Construction,‎ Design & Construction,‎ Military Maintenance, Repair and Operation (MRO),‎ Mining,‎ Industrial Maintenance,‎ Metal Fabrication,‎ Oil & Gas,‎ General Manufacturing
Shelf Life‎‎ 5 Year
Standards/Approvals‎‎ ANSI Z87.1
Vented/Unvented‎‎ Unvented
Weight‎‎ 14.7 Ounce

Our Price: $13.51
3M H-803R-Uv Hard Hat Full Brim 4-Pt Ratchet Blue 3M H-803R-Uv Hard Hat Full Brim 4-Pt Ratchet Blue

Protective full brim hard hat with vents, comfortable 4-point ratchet suspension, standard brow pad and Uvicator™ Sensor. Available in several colors. Meets requirements of ANSI/ISEA Z89.1-2014 Type 1, Class C
  • Impact resistant, ANSI Type I hard hat wears lightweight and comfortable on the head
  • Meets requirements of ANSI/ISEA Z89.1-2014 Type 1, Class C
  • Comfortable suspension sits lower on head to reduce pressure points
  • 4-point ratchet suspension with three position height adjustment allows for customized fit
  • Uvicator sensor shows when it’s time to replace hard hat due to UV exposure
  • Vents allow air circulation to keep worker cooler and more comfortable

3M™ H-800V-UV Series Full Brim Vented Hard Hat with Uvicator™ Sensor and Ratchet Suspension System is comfortable, tough and lightweight protective headgear that helps protect the head from small falling objects and fixed objects that may be bumped into. This hard hat comes with a Uvicator sensor that changes color as the hard hat is exposed to UV light. The sun’s UV rays can cause a hard hat shell to become brittle and compromise its ability to protect the wearer. With the Uvicator sensor, the hard hat should be replaced when the sun smart sensor changes from red to white. Vents built into the hard hat release heat buildup and allow air circulation to enhance comfort of the worker. The cooling effect of air circulation helps reduce perspiration in hot and humid working environments. The 4-point suspension system has unique features that allow for a customized height and fit that best suits the individual needs of the wearer. An optional 6-point suspension strap can be added for additional comfort and fit. The comfortable suspension sits lower on the head to reduce pressure points and increase security, especially when looking up and bending down. A smooth, easy-turning ratchet suspension allows for simple adjustments. A 3-level height adjustment allows workers to customize the fit. The perforated, absorbent brow pad provides enhanced comfort Besides head protection, full brim hard hats offer extra shielding from the sun, splashes, rain, sleet, and snow for enhanced comfort. Full brim hard hats are often preferred in hot and sunny locations because of the extra shading they provide. A hardhat is commonly worn in these industries: heavy and light industrial, construction, oil and gas, road work, utilities, forestry, and mining. This vented hard hat meets requirements of ANSI/ISEA Z89.1-2014 Type 1, Class C. The high visibility orange and high visibility yellow colored hard hats meet ANSI Z89.1-2014 High Visibility Performance requirements.

Attributes

Category‎‎ Head Protection,‎ Head & Face Protection
Class‎‎ C
Color‎‎ Blue
Dielectric‎‎ Class C
Features‎‎ Replaceable brow pad,‎ Uvicator,‎ Smooth easy turning 4-Point Ratchet Suspension
Material‎‎ HDPE
Product Series‎‎ Class C
Product Type‎‎ Full Brim Hard Hats - Vented
Recommended Industry‎‎ Heavy Infrastructure,‎ Transportation,‎ Commercial buildings,‎ Construction,‎ Design & Construction,‎ Military Maintenance, Repair and Operation (MRO),‎ Mining,‎ Industrial Maintenance,‎ Metal Fabrication,‎ Oil & Gas,‎ General Manufacturing
Shelf Life‎‎ 5 Year
Standards/Approvals‎‎ ANSI Z87.1
Vented/Unvented‎‎ Vented
Weight‎‎ 14.6 Ounce

Our Price: $13.51
3M H-805R-Uv Hard Hat Full Brim 4-Pt Ratchet Red 3M H-805R-Uv Hard Hat Full Brim 4-Pt Ratchet Red

Protective full brim hard hat with comfortable 4-point ratchet suspension, standard brow pad and Uvicator™ Sensor. Available in several colors. Meets requirements of ANSI/ISEA Z89.1-2014 Type 1, Class G and E.
  • Impact resistant, ANSI Type I hard hat wears lightweight and comfortable on the head
  • Comfortable suspension sits lower on head to reduce pressure points
  • Smooth, easy turning ratchet suspension is easy to adjust
  • 4-point ratchet suspension with three position height adjustment allows for customized fit
  • Uvicator™ sensor shows when it’s time to replace hard hat due to UV exposure
  • Meets requirements of ANSI/ISEA Z89.1-2014 Type 1, Class G and E

3M™ H-800R-UV Series Full Brim Hard Hat with UVicator™ Sensor and Ratchet System is comfortable, tough and lightweight protective headgear that helps protect the head from small falling objects and fixed objects that may be bumped into. This hard hat comes with a Uvicator sensor that changes color as the hard hat is exposed to UV light. The sun’s UV rays can cause a hard hat shell to become brittle and compromise its ability to protect the wearer. With the Uvicator sensor, the hard hat should be replaced when the sun smart sensor changes from red to white. . The 4-point suspension system has unique features that allows for a customized height and fit that best suits the individual needs of the wearer. An optional 6-point suspension strap can be added for additional comfort and fit. The comfortable suspension sits lower on the head to reduce pressure points and increase security, especially when looking up and bending down. A smooth, easy-turning ratchet suspension allows for simple adjustments. A 3-level height adjustment allows workers to customize the fit. The perforated, absorbent brow pad provides enhanced comfort Besides head protection, full brim hard hats offer extra shielding from the sun, splashes, rain, sleet, and snow for enhanced comfort. Full brim hard hats are often preferred in hot and sunny locations because of the extra shading they provide. A hardhat is commonly worn in these industries: heavy and light industrial, construction, oil and gas, road work, utilities, forestry, and mining. This non-vented hard hat meets requirements of ANSI/ISEA Z89.1-2014 Type 1, Class G and E. The high visibility orange and high visibility yellow colored hard hats meet ANSI Z89.1-2014 High Visibility Performance requirements. The rigid shell of the 3M™ Hard Hat H-800 Series helps reduce chances of injury by deflecting small falling objects from striking the head of the person who wears this protective headgear.

Attributes

Category‎‎ Head Protection,‎ Head & Face Protection
Class‎‎ E,‎ G
Color‎‎ Red
Dielectric‎‎ Class G and E
Features‎‎ Replaceable brow pad,‎ Uvicator,‎ Smooth easy turning 4-Point Ratchet Suspension
Material‎‎ HDPE
Product Series‎‎ Class G,‎ Class E
Product Type‎‎ Full Brim Hard Hats - Non-vented
Recommended Industry‎‎ Heavy Infrastructure,‎ Transportation,‎ Commercial buildings,‎ Construction,‎ Design & Construction,‎ Military Maintenance, Repair and Operation (MRO),‎ Mining,‎ Industrial Maintenance,‎ Metal Fabrication,‎ Oil & Gas,‎ General Manufacturing
Shelf Life‎‎ 5 Year
Standards/Approvals‎‎ ANSI Z87.1
Vented/Unvented‎‎ Unvented
Weight‎‎ 14.7 Ounce

Our Price: $13.51
3M H-806R-Uv Hard Hat Full Brim 4-Pt Ratchet Orange 3M H-806R-Uv Hard Hat Full Brim 4-Pt Ratchet Orange

Protective full brim hard hat with comfortable 4-point ratchet suspension, standard brow pad and Uvicator™ Sensor. Available in several colors. Meets requirements of ANSI/ISEA Z89.1-2014 Type 1, Class G and E.
  • Impact resistant, ANSI Type I hard hat wears lightweight and comfortable on the head
  • Comfortable suspension sits lower on head to reduce pressure points
  • Smooth, easy turning ratchet suspension is easy to adjust
  • 4-point ratchet suspension with three position height adjustment allows for customized fit
  • Uvicator™ sensor shows when it’s time to replace hard hat due to UV exposure
  • Meets requirements of ANSI/ISEA Z89.1-2014 Type 1, Class G and E

3M™ H-800R-UV Series Full Brim Hard Hat with UVicator™ Sensor and Ratchet System is comfortable, tough and lightweight protective headgear that helps protect the head from small falling objects and fixed objects that may be bumped into. This hard hat comes with a Uvicator sensor that changes color as the hard hat is exposed to UV light. The sun’s UV rays can cause a hard hat shell to become brittle and compromise its ability to protect the wearer. With the Uvicator sensor, the hard hat should be replaced when the sun smart sensor changes from red to white. . The 4-point suspension system has unique features that allows for a customized height and fit that best suits the individual needs of the wearer. An optional 6-point suspension strap can be added for additional comfort and fit. The comfortable suspension sits lower on the head to reduce pressure points and increase security, especially when looking up and bending down. A smooth, easy-turning ratchet suspension allows for simple adjustments. A 3-level height adjustment allows workers to customize the fit. The perforated, absorbent brow pad provides enhanced comfort Besides head protection, full brim hard hats offer extra shielding from the sun, splashes, rain, sleet, and snow for enhanced comfort. Full brim hard hats are often preferred in hot and sunny locations because of the extra shading they provide. A hardhat is commonly worn in these industries: heavy and light industrial, construction, oil and gas, road work, utilities, forestry, and mining. This non-vented hard hat meets requirements of ANSI/ISEA Z89.1-2014 Type 1, Class G and E. The high visibility orange and high visibility yellow colored hard hats meet ANSI Z89.1-2014 High Visibility Performance requirements. The rigid shell of the 3M™ Hard Hat H-800 Series helps reduce chances of injury by deflecting small falling objects from striking the head of the person who wears this protective headgear.

Attributes

Category‎‎ Head Protection,‎ Head & Face Protection
Class‎‎ E,‎ G
Color‎‎ Orange
Dielectric‎‎ Class G and E
Features‎‎ Replaceable brow pad,‎ Uvicator,‎ Smooth easy turning 4-Point Ratchet Suspension
Material‎‎ HDPE
Product Series‎‎ Class G,‎ Class E
Product Type‎‎ Full Brim Hard Hats - Non-vented
Recommended Industry‎‎ Heavy Infrastructure,‎ Transportation,‎ Commercial buildings,‎ Construction,‎ Design & Construction,‎ Military Maintenance, Repair and Operation (MRO),‎ Mining,‎ Industrial Maintenance,‎ Metal Fabrication,‎ Oil & Gas,‎ General Manufacturing
Shelf Life‎‎ 5 Year
Standards/Approvals‎‎ ANSI Z87.1
Vented/Unvented‎‎ Unvented
Weight‎‎ 14.7 Ounce

Our Price: $13.51
3M H-807R-Uv Hard Hat Full Brim 4-Pt Ratchet Hi-Viz Orange 3M H-807R-Uv Hard Hat Full Brim 4-Pt Ratchet Hi-Viz Orange

Protective full brim hard hat with comfortable 4-point ratchet suspension, standard brow pad and Uvicator™ Sensor. Available in several colors. Meets requirements of ANSI/ISEA Z89.1-2014 Type 1, Class G and E.
  • Impact resistant, ANSI Type I hard hat wears lightweight and comfortable on the head
  • Comfortable suspension sits lower on head to reduce pressure points
  • Smooth, easy turning ratchet suspension is easy to adjust
  • 4-point ratchet suspension with three position height adjustment allows for customized fit
  • Uvicator™ sensor shows when it’s time to replace hard hat due to UV exposure
  • Meets requirements of ANSI/ISEA Z89.1-2014 Type 1, Class G and E
  • High Visibility color meets ANSI Z89.1-2014 High Visibility Performance Requirements.

3M™ H-800R-UV Series Full Brim Hard Hat with UVicator™ Sensor and Ratchet System is comfortable, tough and lightweight protective headgear that helps protect the head from small falling objects and fixed objects that may be bumped into. This hard hat comes with a Uvicator sensor that changes color as the hard hat is exposed to UV light. The sun’s UV rays can cause a hard hat shell to become brittle and compromise its ability to protect the wearer. With the Uvicator sensor, the hard hat should be replaced when the sun smart sensor changes from red to white. . The 4-point suspension system has unique features that allows for a customized height and fit that best suits the individual needs of the wearer. An optional 6-point suspension strap can be added for additional comfort and fit. The comfortable suspension sits lower on the head to reduce pressure points and increase security, especially when looking up and bending down. A smooth, easy-turning ratchet suspension allows for simple adjustments. A 3-level height adjustment allows workers to customize the fit. The perforated, absorbent brow pad provides enhanced comfort Besides head protection, full brim hard hats offer extra shielding from the sun, splashes, rain, sleet, and snow for enhanced comfort. Full brim hard hats are often preferred in hot and sunny locations because of the extra shading they provide. A hardhat is commonly worn in these industries: heavy and light industrial, construction, oil and gas, road work, utilities, forestry, and mining. This non-vented hard hat meets requirements of ANSI/ISEA Z89.1-2014 Type 1, Class G and E. The high visibility orange and high visibility yellow colored hard hats meet ANSI Z89.1-2014 High Visibility Performance requirements. The rigid shell of the 3M™ Hard Hat H-800 Series helps reduce chances of injury by deflecting small falling objects from striking the head of the person who wears this protective headgear.

Attributes

Category‎‎ Head Protection,‎ Head & Face Protection
Class‎‎ E,‎ G
Color‎‎ Hi-Viz Orange
Dielectric‎‎ Class G and E
Features‎‎ Replaceable brow pad,‎ Uvicator,‎ Smooth easy turning 4-Point Ratchet Suspension
Material‎‎ HDPE
Product Series‎‎ Class G,‎ Class E
Product Type‎‎ Full Brim Hard Hats - Non-vented
Recommended Industry‎‎ Heavy Infrastructure,‎ Transportation,‎ Commercial buildings,‎ Construction,‎ Design & Construction,‎ Military Maintenance, Repair and Operation (MRO),‎ Mining,‎ Industrial Maintenance,‎ Metal Fabrication,‎ Oil & Gas,‎ General Manufacturing
Shelf Life‎‎ 5 Year
Standards/Approvals‎‎ ANSI Z87.1
Vented/Unvented‎‎ Unvented
Weight‎‎ 14.7 Ounce

Our Price: $13.51
3M H-809R-Uv Hard Hat Full Brim 4-Pt Ratchet Hi-Viz Yellow 3M H-809R-Uv Hard Hat Full Brim 4-Pt Ratchet Hi-Viz Yellow

Protective full brim hard hat with comfortable 4-point ratchet suspension, standard brow pad and Uvicator™ Sensor. Available in several colors. Meets requirements of ANSI/ISEA Z89.1-2014 Type 1, Class G and E.
  • Impact resistant, ANSI Type I hard hat wears lightweight and comfortable on the head
  • Comfortable suspension sits lower on head to reduce pressure points
  • Smooth, easy turning ratchet suspension is easy to adjust
  • 4-point ratchet suspension with three position height adjustment allows for customized fit
  • Uvicator™ sensor shows when it’s time to replace hard hat due to UV exposure
  • Meets requirements of ANSI/ISEA Z89.1-2014 Type 1, Class G and E
  • High Visibility color meets ANSI Z89.1-2014 High Visibility Performance Requirements.

3M™ H-800R-UV Series Full Brim Hard Hat with UVicator™ Sensor and Ratchet System is comfortable, tough and lightweight protective headgear that helps protect the head from small falling objects and fixed objects that may be bumped into. This hard hat comes with a Uvicator sensor that changes color as the hard hat is exposed to UV light. The sun’s UV rays can cause a hard hat shell to become brittle and compromise its ability to protect the wearer. With the Uvicator sensor, the hard hat should be replaced when the sun smart sensor changes from red to white. . The 4-point suspension system has unique features that allows for a customized height and fit that best suits the individual needs of the wearer. An optional 6-point suspension strap can be added for additional comfort and fit. The comfortable suspension sits lower on the head to reduce pressure points and increase security, especially when looking up and bending down. A smooth, easy-turning ratchet suspension allows for simple adjustments. A 3-level height adjustment allows workers to customize the fit. The perforated, absorbent brow pad provides enhanced comfort Besides head protection, full brim hard hats offer extra shielding from the sun, splashes, rain, sleet, and snow for enhanced comfort. Full brim hard hats are often preferred in hot and sunny locations because of the extra shading they provide. A hardhat is commonly worn in these industries: heavy and light industrial, construction, oil and gas, road work, utilities, forestry, and mining. This non-vented hard hat meets requirements of ANSI/ISEA Z89.1-2014 Type 1, Class G and E. The high visibility orange and high visibility yellow colored hard hats meet ANSI Z89.1-2014 High Visibility Performance requirements. The rigid shell of the 3M™ Hard Hat H-800 Series helps reduce chances of injury by deflecting small falling objects from striking the head of the person who wears this protective headgear.

Attributes

Category‎‎ Head Protection,‎ Head & Face Protection
Class‎‎ E,‎ G
Color‎‎ High Vis Yellow
Dielectric‎‎ Class G and E
Features‎‎ Replaceable brow pad,‎ Uvicator,‎ Smooth easy turning 4-Point Ratchet Suspension
Material‎‎ HDPE
Product Series‎‎ Class G,‎ Class E
Product Type‎‎ Full Brim Hard Hats - Non-vented
Recommended Industry‎‎ Heavy Infrastructure,‎ Transportation,‎ Commercial buildings,‎ Construction,‎ Design & Construction,‎ Military Maintenance, Repair and Operation (MRO),‎ Mining,‎ Industrial Maintenance,‎ Metal Fabrication,‎ Oil & Gas,‎ General Manufacturing
Shelf Life‎‎ 5 Year
Standards/Approvals‎‎ ANSI Z87.1
Vented/Unvented‎‎ Unvented
Weight‎‎ 14.7 Ounce

Our Price: $13.51
3M H-801V-Uv Hard Hat Full Brim Vented 4-Pt Ratchet White 3M H-801V-Uv Hard Hat Full Brim Vented 4-Pt Ratchet White

Protective full brim hard hat with vents, comfortable 4-point ratchet suspension, standard brow pad and Uvicator™ Sensor. Available in several colors. Meets requirements of ANSI/ISEA Z89.1-2014 Type 1, Class C
  • Impact resistant, ANSI Type I hard hat wears lightweight and comfortable on the head
  • Meets requirements of ANSI/ISEA Z89.1-2014 Type 1, Class C
  • Comfortable suspension sits lower on head to reduce pressure points
  • 4-point ratchet suspension with three position height adjustment allows for customized fit
  • Uvicator sensor shows when it’s time to replace hard hat due to UV exposure
  • Vents allow air circulation to keep worker cooler and more comfortable

3M™ H-800V-UV Series Full Brim Vented Hard Hat with Uvicator™ Sensor and Ratchet Suspension System is comfortable, tough and lightweight protective headgear that helps protect the head from small falling objects and fixed objects that may be bumped into. This hard hat comes with a Uvicator sensor that changes color as the hard hat is exposed to UV light. The sun’s UV rays can cause a hard hat shell to become brittle and compromise its ability to protect the wearer. With the Uvicator sensor, the hard hat should be replaced when the sun smart sensor changes from red to white. Vents built into the hard hat release heat buildup and allow air circulation to enhance comfort of the worker. The cooling effect of air circulation helps reduce perspiration in hot and humid working environments. The 4-point suspension system has unique features that allow for a customized height and fit that best suits the individual needs of the wearer. An optional 6-point suspension strap can be added for additional comfort and fit. The comfortable suspension sits lower on the head to reduce pressure points and increase security, especially when looking up and bending down. A smooth, easy-turning ratchet suspension allows for simple adjustments. A 3-level height adjustment allows workers to customize the fit. The perforated, absorbent brow pad provides enhanced comfort Besides head protection, full brim hard hats offer extra shielding from the sun, splashes, rain, sleet, and snow for enhanced comfort. Full brim hard hats are often preferred in hot and sunny locations because of the extra shading they provide. A hardhat is commonly worn in these industries: heavy and light industrial, construction, oil and gas, road work, utilities, forestry, and mining. This vented hard hat meets requirements of ANSI/ISEA Z89.1-2014 Type 1, Class C. The high visibility orange and high visibility yellow colored hard hats meet ANSI Z89.1-2014 High Visibility Performance requirements.

Attributes

Category‎‎ Head Protection,‎ Head & Face Protection
Class‎‎ C
Color‎‎ White
Dielectric‎‎ Class C
Features‎‎ Replaceable brow pad,‎ Uvicator,‎ Smooth easy turning 4-Point Ratchet Suspension
Material‎‎ HDPE
Product Series‎‎ Class C
Product Type‎‎ Full Brim Hard Hats - Vented
Recommended Industry‎‎ Heavy Infrastructure,‎ Transportation,‎ Commercial buildings,‎ Construction,‎ Design & Construction,‎ Military Maintenance, Repair and Operation (MRO),‎ Mining,‎ Industrial Maintenance,‎ Metal Fabrication,‎ Oil & Gas,‎ General Manufacturing
Shelf Life‎‎ 5 Year
Standards/Approvals‎‎ ANSI Z87.1
Vented/Unvented‎‎ Vented
Weight‎‎ 14.6 Ounce

Our Price: $14.08
3M H-802V-Uv Hard Hat Full Brim Vented 4-Pt Ratchet Yellow 3M H-802V-Uv Hard Hat Full Brim Vented 4-Pt Ratchet Yellow

Protective full brim hard hat with vents, comfortable 4-point ratchet suspension, standard brow pad and Uvicator™ Sensor. Available in several colors. Meets requirements of ANSI/ISEA Z89.1-2014 Type 1, Class C
  • Impact resistant, ANSI Type I hard hat wears lightweight and comfortable on the head
  • Meets requirements of ANSI/ISEA Z89.1-2014 Type 1, Class C
  • Comfortable suspension sits lower on head to reduce pressure points
  • 4-point ratchet suspension with three position height adjustment allows for customized fit
  • Uvicator sensor shows when it’s time to replace hard hat due to UV exposure
  • Vents allow air circulation to keep worker cooler and more comfortable

3M™ H-800V-UV Series Full Brim Vented Hard Hat with Uvicator™ Sensor and Ratchet Suspension System is comfortable, tough and lightweight protective headgear that helps protect the head from small falling objects and fixed objects that may be bumped into. This hard hat comes with a Uvicator sensor that changes color as the hard hat is exposed to UV light. The sun’s UV rays can cause a hard hat shell to become brittle and compromise its ability to protect the wearer. With the Uvicator sensor, the hard hat should be replaced when the sun smart sensor changes from red to white. Vents built into the hard hat release heat buildup and allow air circulation to enhance comfort of the worker. The cooling effect of air circulation helps reduce perspiration in hot and humid working environments. The 4-point suspension system has unique features that allow for a customized height and fit that best suits the individual needs of the wearer. An optional 6-point suspension strap can be added for additional comfort and fit. The comfortable suspension sits lower on the head to reduce pressure points and increase security, especially when looking up and bending down. A smooth, easy-turning ratchet suspension allows for simple adjustments. A 3-level height adjustment allows workers to customize the fit. The perforated, absorbent brow pad provides enhanced comfort Besides head protection, full brim hard hats offer extra shielding from the sun, splashes, rain, sleet, and snow for enhanced comfort. Full brim hard hats are often preferred in hot and sunny locations because of the extra shading they provide. A hardhat is commonly worn in these industries: heavy and light industrial, construction, oil and gas, road work, utilities, forestry, and mining. This vented hard hat meets requirements of ANSI/ISEA Z89.1-2014 Type 1, Class C. The high visibility orange and high visibility yellow colored hard hats meet ANSI Z89.1-2014 High Visibility Performance requirements.

Attributes

Category‎‎ Head Protection,‎ Head & Face Protection
Class‎‎ C
Color‎‎ Yellow
Dielectric‎‎ Class C
Features‎‎ Replaceable brow pad,‎ Uvicator,‎ Smooth easy turning 4-Point Ratchet Suspension
Material‎‎ HDPE
Product Series‎‎ Class C
Product Type‎‎ Full Brim Hard Hats - Vented
Recommended Industry‎‎ Heavy Infrastructure,‎ Transportation,‎ Commercial buildings,‎ Construction,‎ Design & Construction,‎ Military Maintenance, Repair and Operation (MRO),‎ Mining,‎ Industrial Maintenance,‎ Metal Fabrication,‎ Oil & Gas,‎ General Manufacturing
Shelf Life‎‎ 5 Year
Standards/Approvals‎‎ ANSI Z87.1
Vented/Unvented‎‎ Vented
Weight‎‎ 14.6 Ounce

Our Price: $14.08
3M H-803V-Uv Hard Hat Full Brim Vented 4-Pt Ratchet Blue 3M H-803V-Uv Hard Hat Full Brim Vented 4-Pt Ratchet Blue

Protective full brim hard hat with comfortable 4-point ratchet suspension, standard brow pad and Uvicator™ Sensor. Available in several colors. Meets requirements of ANSI/ISEA Z89.1-2014 Type 1, Class G and E.
  • Impact resistant, ANSI Type I hard hat wears lightweight and comfortable on the head
  • Comfortable suspension sits lower on head to reduce pressure points
  • Smooth, easy turning ratchet suspension is easy to adjust
  • 4-point ratchet suspension with three position height adjustment allows for customized fit
  • Uvicator™ sensor shows when it’s time to replace hard hat due to UV exposure
  • Meets requirements of ANSI/ISEA Z89.1-2014 Type 1, Class G and E

3M™ H-800R-UV Series Full Brim Hard Hat with UVicator™ Sensor and Ratchet System is comfortable, tough and lightweight protective headgear that helps protect the head from small falling objects and fixed objects that may be bumped into. This hard hat comes with a Uvicator sensor that changes color as the hard hat is exposed to UV light. The sun’s UV rays can cause a hard hat shell to become brittle and compromise its ability to protect the wearer. With the Uvicator sensor, the hard hat should be replaced when the sun smart sensor changes from red to white. . The 4-point suspension system has unique features that allows for a customized height and fit that best suits the individual needs of the wearer. An optional 6-point suspension strap can be added for additional comfort and fit. The comfortable suspension sits lower on the head to reduce pressure points and increase security, especially when looking up and bending down. A smooth, easy-turning ratchet suspension allows for simple adjustments. A 3-level height adjustment allows workers to customize the fit. The perforated, absorbent brow pad provides enhanced comfort Besides head protection, full brim hard hats offer extra shielding from the sun, splashes, rain, sleet, and snow for enhanced comfort. Full brim hard hats are often preferred in hot and sunny locations because of the extra shading they provide. A hardhat is commonly worn in these industries: heavy and light industrial, construction, oil and gas, road work, utilities, forestry, and mining. This non-vented hard hat meets requirements of ANSI/ISEA Z89.1-2014 Type 1, Class G and E. The high visibility orange and high visibility yellow colored hard hats meet ANSI Z89.1-2014 High Visibility Performance requirements. The rigid shell of the 3M™ Hard Hat H-800 Series helps reduce chances of injury by deflecting small falling objects from striking the head of the person who wears this protective headgear.

Attributes

Category‎‎ Head Protection,‎ Head & Face Protection
Class‎‎ E,‎ G
Color‎‎ Blue
Dielectric‎‎ Class G and E
Features‎‎ Replaceable brow pad,‎ Uvicator,‎ Smooth easy turning 4-Point Ratchet Suspension
Material‎‎ HDPE
Product Series‎‎ Class G,‎ Class E
Product Type‎‎ Full Brim Hard Hats - Non-vented
Recommended Industry‎‎ Heavy Infrastructure,‎ Transportation,‎ Commercial buildings,‎ Construction,‎ Design & Construction,‎ Military Maintenance, Repair and Operation (MRO),‎ Mining,‎ Industrial Maintenance,‎ Metal Fabrication,‎ Oil & Gas,‎ General Manufacturing
Shelf Life‎‎ 5 Year
Standards/Approvals‎‎ ANSI Z87.1
Vented/Unvented‎‎ Unvented
Weight‎‎ 14.7 Ounce

Our Price: $14.08