IndustrialSafety.com > Products > Quick Ship Products
We found 18 results matching your criteria.
Narrow down your selection:
Eyewash Products
Sort By:
Page of 1
Guardian G1540BA-R Case of (4) 8oz Bacteriostatic Additive Guardian G1540BA-R Case of (4) 8oz Bacteriostatic Additive

Guardian G1540BA-R Case of (4) 8oz Bacteriostatic Additive

Our Price: $38.90
Guardian G1100 Eye Safe Faucet Mounted Eye Wash Guardian G1100 Eye Safe Faucet Mounted Eye Wash

Guardian G1100 Eye Safe Faucet Mounted Eye Wash


  • EyeSafe™ Faucet-Mounted Eyewash, Adjustable Aerated Outlet Heads
  • Application: EyeSafe™ faucet-mounted eyewashes convert any faucet into an emergency eyewash station without interfering with normal faucet operation. An EyeSafe™ unit can be installed at any sink, close to where accidents might occur. In an emergency, unit is quickly located and activated, and provides an unlimited supply of potable water for rinsing the user’s eyes.
  • outlet heads: Outlet heads are mounted 3" apart and deliver a soft, aerated flow of water. Heads angle forward toward user. Angle of heads is adjustable to permit full coverage and avoid splashing. Furnished with float-off dust covers to protect outlet heads.
  • valve: Forged brass diverter valve. Pull knob to activate eyewash; water pressure holds eyewash in operation, leaving user’s hands free. Push knob or turn off faucet to return to normal faucet operation.
  • inlet: Body has 55/64"-27 female thread. Furnished with three adapters (15/16"-27, 13/16"-27 and 3/8" IPS) for installing on most commonly used faucets, including laboratory-type faucets.
  • outlet: Furnished with removable aerator on bottom.
  • quality assurance: Each unit is completely assembled and water tested prior to shipment.
  • Important: Faucet-mounted eyewashes, whether manufactured by Guardian Equipment or other companies, require two motions to operate (turn on water, pull knob to activate eyewash flow). Therefore, Guardian does not believe that these units meet the provisions of ANSI Z358.1-2014 as eyewash units. These units are intended solely as supplemental units in addition to dedicated, plumbed eyewash equipment installed in the workplace.
  • Faucet-mounted eyewashes should be used with cold or warm water only. Use of hot water might cause scalding.
  • Available Options
    • AP400-012 Inlet adaptor with 13/16"-24 female thread
    • 250-046R Replacement float-off dust covers (package of 2).

Our Price: $67.57
Guardian G1101 Eye Safe-x Faucet Mounted Eye Wash Guardian G1101 Eye Safe-x Faucet Mounted Eye Wash

Guardian G1101 Eye Safe-x Faucet Mounted Eye Wash

Our Price: $77.63
Guardian G1643 Horizontally Mounted Emergency Shower Guardian G1643 Horizontally Mounted Emergency Shower

Guardian G1643 Horizontally Mounted Emergency Shower

Our Price: $158.95
Guardian G1814P Wall Mounted Emergency Eye Wash, Plastic Bowl Guardian G1814P Wall Mounted Emergency Eye Wash, Plastic Bowl

Guardian G1814P Wall Mounted Emergency Eye Wash


  • G1814P - Eyewash, Wall Mounted, Plastic Bowl
  • Application: Eyewash for wall mounting. Two GS-Plus™ spray-type spray heads deliver a flood of water for rinsing eyes.
  • Spray head assembly: Two GS-Plus™ spray heads. Each head has a “flip top” dust cover, internal flow control and filter to remove impurities from the water flow.
  • Valve: 1/2" IPS chrome plated brass stay-open ball valve. Valve is US-made with chrome plated brass ball and Teflon® seals.
  • Bowl: 11-3/4" diameter orange ABS plastic.
  • Mounting: Heavy duty cast aluminum wall bracket with corrosion resistant powder coated finish.
  • Supply: 1/2" NPT female inlet.
  • Waste: 1-1/4" NPT female outlet.
  • Sign: ANSI-compliant identification sign.
  • Quality assurance: Unit is completely assembled and water tested prior to shipment.

Our Price: $180.40
Guardian G1540 16 Gal Portable Eye Wash Unit Guardian G1540 16 Gal Portable Eye Wash Unit

Guardian G1540 16 Gal Portable Eye Wash Unit

Our Price: $189.40
Guardian G1750P Wall Mounted Eye/Face Wash Guardian G1750P Wall Mounted Eye/Face Wash

Guardian G1750P Wall Mounted Eye/Face Wash



Application: Eye/face wash for wall mounting. Two large FS-Plus™ spray-type outlet heads deliver a flood of water for rinsing eyes and face.

Spray Head Assembly: Two FS-Plus™ spray heads. Each head has a “flip top” dust cover, internal flow control and filter to remove impurities from the water flow.

Valve: 1/2" IPS chrome plated brass stay-open ball valve. Valve is US-made with chrome plated brass ball and Teflon® seals.

Bowl: 11-3/4" diameter orange ABS plastic.

Mounting: Heavy duty cast aluminum wall bracket with corrosion resistant powder coated finish.

Supply: 1/2" NPT female inlet.

Waste: 1-1/4" NPT female outlet.

Sign: ANSI-compliant identification sign.

Quality Assurance: Unit is completely assembled and water tested prior to shipment.

Available Option

  • DC Stainless steel dust cover for each spray head.
  • GRN Green ABS plastic bowl.
  • YEL Yellow ABS plastic bowl.
  • HS Auxiliary hand-held drench hose for rinsing eyes, face or body.
  • SC Self-closing ball valve. Note: Eye/face washes with self-closing valves do not comply with ANSI Z358.1 - 2014.
  • T Chrome plated brass tailpiece and trap with 1 1/2" IPS waste connection.
  • TP 1 1/2" OD chrome plated brass tailpiece.
  • TMV G3600LF thermostatic mixing valve precisely blends hot and cold water to deliver warm (tepid) water as provided by ANSI Z358.1 - 2014. Refer to Tempering Units section for complete technical and product selection information

Our Price: $206.72
Guardian G1825P Pedestal Mounted Emergency Eye Wash Guardian G1825P Pedestal Mounted Emergency Eye Wash

Guardian G1825P Pedestal Mounted Emergency Eye Wash



Application: Free standing, pedestal mounted eyewash. Two GS-Plus™ spray-type spray heads deliver a flood of water for rinsing eyes.

Spray Head Assembly: Two GS-Plus™ spray heads. Each head has a “flip top” dust cover, internal flow control and filter to remove impurities from the water flow.

Valve: 1/2" IPS chrome plated brass stay-open ball valve. Valve is US-made with chrome plated brass ball and Teflon® seals.

Bowl: 11-3/4" diameter orange ABS plastic.

Pipe And Fittings: Schedule 40 galvanized steel. Furnished with orange polyethylene covers for vertical piping for high visibility and corrosion resistance.

Supply: 1/2" NPT female inlet.

Waste: 1-1/4" NPT female outlet.

Sign: ANSI-compliant identification sign.

Quality Assurance: Valve, bowl and spray head assembly is factory assembled and water tested prior
to shipment.

Available Option

  • DC Stainless steel dust cover for each spray head.
  • HFC Hand and foot control. Eyewash is activated by flag handle or foot treadle.
  • HS Auxiliary hand-held drench hose for rinsing eyes, face or body.
  • SC Self-closing ball valve. Note: Eyewashes with self-closing valves do not comply with ANSI Z358.1 - 2014.
  • TMV G3600LF thermostatic mixing valve precisely blends hot and cold water to deliver warm (tepid) water as provided by ANSI Z358.1 - 2014. Refer to Tempering Units section for complete technical and product selection information.

Our Price: $237.25
Guardian G5026 Wall Mounted Dual Hd Eye Wash Guardian G5026 Wall Mounted Dual Hd Eye Wash

Guardian G5026 Wall Mounted Dual Hd Eye Wash


Application: Dual purpose eyewash/drench hose for wall mounting. Unit meets the provisions of ANSI Z358.1 - 2014 as both an eyewash and a drench hose. Unit may be left in the mounting bracket for use as a fixed eyewash, leaving user’s hands free. Alternatively, unit may be removed for use as a drench hose to rinse any part of user’s eyes, face or body.

Spray Head Assembly: Two GS-Plus™ spray heads mounted side-by-side. Each head has a “flip top” dust cover, internal flow control and filter to remove impurities from the water flow.

Valve: Forged brass squeeze valve activated by stainless steel lever handle. Valve has replaceable stainless steel seat for exceptional durability. Locking clip engages when handle is depressed, providing “hands free” operation. Valve stays open until locking clip is released.

Hose: 8' reinforced PVC hose. 300 PSI maximum working pressure.

Mounting: Bracket with spring clips to hold unit on wall. Clips position spray heads and handle to face forward at all times.

Backflow Preventer: In-line dual check backflow preventer installed on inlet of hose (G5026BP only). Note: Check with code authority for compliance with local plumbing code.

Supply: 3/8" NPT male swivel-type inlet.

Sign: ANSI-compliant identification sign.

Quality Assurance: Unit is completely assembled and water tested prior to shipment.

Available Option

  • DC Stainless steel dust cover for each spray head.
  • FSH 8 ft. flexible stainless steel hose in place of PVC hose.
  • VB In-line vacuum breaker for installation between valve and spray head.
  • TMV G3600LF thermostatic mixing valve precisely blends hot and cold water to deliver warm (tepid) water as provided by ANSI Z358.1 - 2014. Refer to Tempering Units section for complete technical and product selection information.

Our Price: $246.20
Guardian G5022 Deck Mounted Dual Hd Eye Wash Guardian G5022 Deck Mounted Dual Hd Eye Wash

Guardian G5022 Deck Mounted Dual Hd Eye Wash


Application: Dual purpose eye wash/drench hose for deck mounting. Unit meets the provisions of ANSI Z358.1 - 2014 as both an eye wash and a drench hose. Unit may be left in the deck flange for use as a fixed eye wash, leaving user’s hands free. Alternatively, unit may be removed for use as a drench hose to rinse any part of user’s eyes, face or body.

Spray Head Assembly: Two GS-Plus™ spray heads mounted side-by-side. Each head has a “flip top” dust cover, internal flow control and filter to remove impurities from the water flow.

Valve: Forged brass squeeze valve activated by stainless steel lever handle. Valve has replaceable stainless steel seat for exceptional durability. Locking clip engages when handle is depressed, providing “hands free” operation. Valve stays open until locking clip is released.

Hose: 8' reinforced PVC hose. 300 PSI maximum working pressure.

Mounting: Deck flange for countertop mounting. Flange has handle locator guide to position spray heads and handle facing forward at all times.

Backflow Preventer: In-line dual check backflow preventer installed on inlet of hose (G5022BP only). Note: Check with code authority for compliance with local plumbing code.

Supply: 3/8" NPT male swivel-type inlet.

Sign: ANSI-compliant identification sign.

Quality Assurance: Unit is completely assembled and water tested prior to shipment.

Available Option

  • DC Stainless steel dust cover for each spray head.
  • FSH 8 ft. flexible stainless steel hose in place of PVC hose.
  • HG Undercounter hose guide bracket to prevent hose from tangling or binding.
  • VB In-line vacuum breaker for installation between valve and spray head.
  • TMV G3600LF thermostatic mixing valve precisely blends hot and cold water to deliver warm (tepid) water as provided by ANSI Z358.1 - 2014. Refer to Tempering Units section for complete technical and product selection information.

Our Price: $255.00
Guardian G1750 Wall Mounted Eye/Face Wash Guardian G1750 Wall Mounted Eye/Face Wash

Guardian G1750 Wall Mounted Eye/Face Wash

Our Price: $258.93
Guardian G1814BC Wall Mounted Emergency Eye Wash Guardian G1814BC Wall Mounted Emergency Eye Wash

Guardian G1814BC Wall Mounted Emergency Eye Wash



Application: Eyewash for wall mounting. Two GS-Plus™ spray-type spray heads deliver a flood of water for rinsing eyes.

Spray Head Assembly: Two GS-Plus™ spray heads. Each head has a “flip top” dust cover, internal flow control and filter to remove impurities from the water flow.

Valve: 1/2" IPS chrome plated brass stay-open ball valve. Valve is US-made with chrome plated brass ball and Teflon® seals.

Bowl: 11-1/8" diameter stainless steel.

Mounting: Heavy duty cast aluminum wall bracket with corrosion resistant powder coated finish.

Supply: 1/2" NPT female inlet.

Waste: 1-1/4" NPT female outlet.

Sign: ANSI-compliant identification sign.

Quality Assurance: Unit is completely assembled and water tested prior to shipment.

AVAILABLE OPTIONS

  • BC Stainless steel bowl cover. Cover protects unit against contaminants. Cover is automatically raised when unit is activated.
  • DC Stainless steel dust cover for each spray head.
  • HS Auxiliary hand-held drench hose for rinsing eyes, face or body.
  • SC Self-closing ball valve. Note: Eyewashes with self-closing valves do not comply with ANSI Z358.1 - 2014.
  • T Chrome plated brass tailpiece and trap with 1 1/2" IPS waste connection.
  • TP 1 1/2" OD chrome plated brass tailpiece.
  • TMV G3600LF thermostatic mixing valve precisely blends hot and cold water to deliver warm (tepid) water as provided by ANSI Z358.1 - 2014. Refer to Tempering Units section for complete technical and product selection information.

Our Price: $383.37
Guardian G1902P Eye Wash/Shower Safety Station Guardian G1902P Eye Wash/Shower Safety Station

APPLICATION: Combination eyewash and shower safety station. Two GS-Plus™ spray-type outlet heads deliver a flood of water for rinsing eyes.

Our Price: $559.41
Guardian G1902 Eye Wash/Shower Safety Station Guardian G1902 Eye Wash/Shower Safety Station

Guardian G1902 Eye Wash/Shower Safety Station


Application: Combination eyewash and shower safety station. Two GS-Plus™ spray-type outlet heads deliver a flood of water for rinsing eyes.

Shower Head: 10" diameter orange ABS plastic.

Shower Valve: 1" IPS chrome plated brass stay-open ball valve. Valve is US-made with chrome plated brass ball and Teflon® seals. Furnished with stainless steel actuating arm and 29" stainless steel pull rod.

Spray Head Assembly: Two GS-Plus™ spray heads. Each head has a “flip top” dust cover, internal flow control and filter to remove impurities from water.

Eyewash Bowl: 11-1/2" stainless steel.

Eyewash Valve:1/2" IPS chrome plated brass stay-open ball valve. Valve is US-made with chrome plated brass ball and Teflon® seals.

Pipe & Fittings: Schedule 40 galvanized steel. Furnished with orange polyethylene covers for vertical piping for high visibility and corrosion resistance.

Supply: 1-1/4" NPT female top or side inlet.

Waste: 1-1/4" NPT female outlet. Outlet can be positioned at either 9-1/4" or 19-5/8" above finished floor by reversing lower pipe nipples.

Sign: Furnished with ANSI-compliant identification sign.

Quality Assurance: Valve and spray head assemblies are factory assembled and water tested prior to shipment.

Available Option

  • GC Powder coated finish on galvanized pipe and fittings. Available colors include orange, yellow, red and green.
  • FC20 Regulates shower flow rate to 20 GPM.
  • GRN Green ABS plastic shower head.
  • YEL Yellow ABS plastic shower head.
  • SSH Stainless steel shower head.
  • AP275-100 ELECTRIC LIGHT AND ALARM HORN Light and alarm horn summon assistance when eye/face wash or shower is activated.
  • AP250-015 MODESTY CURTAIN Modesty curtain for mounting on safety station.
  • TMV G3800LF thermostatic mixing valve precisely blends hot and cold water to deliver warm (tepid) water as required by ANSI Z358.1-2014.

Our Price: $629.86
Guardian G1902BC Eye Wash/Shower Safety Station Guardian G1902BC Eye Wash/Shower Safety Station

Guardian G1902BC Eye Wash/Shower Safety Station


Application: Combination eyewash and shower safety station. Eyewash has stainless steel cover to protect bowl from dust, dirt and other contaminants. Cover is raised automatically when flag handle is activated. Cover closes when handle is returned to closed position. Two GS-Plus™ spray-type outlet heads deliver a flood of water for rinsing eyes.

Shower Head: 10" diameter orange ABS plastic.

Shower Valve: 1" IPS chrome plated brass stay-open ball valve. Valve is US-made with chrome plated brass ball and Teflon® seals. Furnished with stainless steel actuating arm and 29" stainless steel pull rod.

Spray Head Assembly: Two GS-Plus™ spray heads. Each head has an internal flow control and filter to remove impurities from water.

Eye/Face Wash Bowl: 11-1/2" stainless steel with stainless steel cover.

Eye/Face Wash Valve: 1/2" IPS chrome plated brass stay-open ball valve. Valve is US-made with chrome plated brass ball and Teflon® seals.

Pipe & Fittings: Schedule 40 galvanized steel. Furnished with orange polyethylene covers for vertical piping for high visibility and corrosion resistance.

Supply: 1-1/4" NPT female top or side inlet.

Waste: 1-1/4" NPT female outlet. Outlet can be positioned at either 9-1/4" or 19-5/8" above finished floor by reversing lower pipe nipples.

Sign: Furnished with ANSI-compliant identification sign.

Quality Assurance: Valve and spray head assemblies are factory assembled and water tested prior to shipment.

Available Option

  • GC Powder coated finish on galvanized pipe and fittings. Available colors include orange, yellow, red and green.
  • FC20 Regulates shower flow rate to 20 GPM.
  • GRN Green ABS plastic shower head.
  • YEL Yellow ABS plastic shower head.
  • SSH Stainless steel shower head.
  • AP275-100 ELECTRIC LIGHT AND ALARM HORN Light and alarm horn summon assistance when eye/face wash or shower is activated.
  • AP250-015 MODESTY CURTAIN Modesty curtain for mounting on safety station.
  • TMV G3800LF thermostatic mixing valve precisely blends hot and cold water to deliver warm (tepid) water as required by ANSI Z358.1-2014.

Our Price: $792.32
Guardian G1562 15 Gal Portable Eye Wash/spray Guardian G1562 15 Gal Portable Eye Wash/spray

Guardian G1562 15 Gal Portable Eye Wash/spray

G1562

15 Gallon Portable Eyewash/Drench Hose Unit
Application: Self-contained eyewash and/or drench hose units are ideal where a continuous supply of potable water is not available. These units may be used in low traffic areas, low hazard areas or where installation of plumbed equipment is not cost effective. Fifteen gallon units provide approximately 10 usable gallons (37.9 liters) of water for effective rinsing of the eyes, face or body. Note that, under ANSI Z358.1-2009, drench hose units supplement but do not replace other types of emergency equipment.

Tank: 15 gallon stainless steel pressurized tank. Tank has built-in carrying handles, air intake fitting, pressure gauge and pressure relief valve. Tank has approximately 10 gallons (37.9 liters) usable capacity.

Eyewash Unit: Two GS-Plus spray heads, each with a “flip top” dust cover, internal flow control and filter. 1/2” IPS chrome plated brass stay-open ball valve with flag handle. Pressure regulator controls eyewash flow to 0.65 GPM for 15 minutes.

Drench Hose: Single GS-Plus spray head with “flip top” dust cover, internal flow control and filter. Chrome plated brass squeeze valve with stainless steel lever handle and 6 ft. reinforced PVC hose.

Operation: To operate unit, fill with clean potable water and add bacteriostatic additive (supplied with unit). Additive protects against growth of bacteria, fungus, algae and acanthamoeba inside unit. After filling with water, pressurize unit to 80 PSI air pressure. If necessary, adjust pressure regulator to achieve maximum flow for fifteen minutes. Unit should be inspected regularly and water in unit should be changed at least once every six months. Filling instructions included.

Weight: 35.6 lbs. empty, 118.9 lbs. filled.
quality assurance: Unit is completely assembled, pressurized and water tested prior to shipment.
sign: ANSI compliant identification sign permanently affixed to tank.

Quality Assurance: Unit is fully assembled, pressurized and water tested at the factory. Unit is depressurized and emptied prior to shipping. Some assembly required in field.

Sign: ANSI compliant identification sign permanently affixed to tank.

AVAILABLE OPTIONS

G1540BA 8 oz. bottle of bacteriostatic additive to protect against growth of bacteria and other impurities in portable unit.
200-013R Two wheel hand cart for transporting and storing unit.

Our Price: $826.00
Guardian G1562HTR 15 Gal Portable Eye Wash/spray w/Heat Traced Jacket Guardian G1562HTR 15 Gal Portable Eye Wash/spray w/Heat Traced Jacket

Guardian G1562HTR 15 Gal Portable Eye Wash/spray w/Heat Traced Jacket

G1562HTR

15 Gallon Portable Eyewash/Drench Hose Unit
Application: Self-contained heated eyewash and/or drench hose. Unit delivers over ten gallons (37.9 liters) of water for fifteen minutes, thus complying with the provisions of ANSI Z358.1-2009 for eyewashes. Unit is heated and insulated to endure sustained low or freezing temperatures over long periods of time. Unit is fully freeze-resistant, and tempered, for both in-door and out-door environments. Unit is ideal for use where a continuous supply of potable water is not available, especially in remote plant areas, low traffic and/or low hazard areas.

Tank And Jacket: 15 gallon stainless steel pressurized tank. Tank has built-in carrying handles, air intake fitting, pressure gauge and pressure relief valve. Tank has approximately 10 gallons (37.9 litters) usable capacity.

Heating Element: Heating element is made of silicone rubber and is attached to the tank with a spring latch. The water temperature inside of the tank is regulated by an onboard thermostat set to 65°F. The total amp draw is 3.33A and delivers 400W of power, which allows the unit to operate to temperatures as low as -20°F.

Ground Fault Plug: Unit comes standard with a 15A Ground Fault Circuit Interrupter (GFCI) with manual reset connected to a 9 foot long cord.

Eyewash Unit: Two GS –Plus spray heads, each with a “flip top” dust cover, internal flow control and filter. A 1/2” IPS chrome plated brass stay-open three way self draining ball valve with stainless steel flag handle. Pressure regulator controls eyewash flow to 0.65 GPM for 15 minutes.

Drench Hose: Single GS-Plus spray head with “flip top” dust cover, internal flow control and filter. Chrome plated brass squeeze valve with stainless steel lever handle and 6 foot reinforced PVC hose.

Operation: To operate unit, fill with clean potable water and add bacteriostatic additive (supplied with unit). Additive protects against growth of bacteria, fungus, algae and acanthamoeba inside unit. After filling with water, pressurize unit to 80 PSI air pressure. If necessary, adjust pressure regulator to achieve maximum flow for fifteen minutes. Unit should be inspected regularly and water in unit should be changed at least once every six months. Filling instructions included.

Weight: 41.5 lbs. empty, 124.8 lbs. filled.

Quality Assurance: Unit is fully assembled, pressurized and water tested at the factory. Unit is depressurized and emptied prior to shipping. Some assembly required in the field.

Sign: ANSI compliant identification sign permanently affixed to insulated jacket.

AVAILABLE OPTIONS

G1540BA 8 oz. bottle of bacteriostatic additive to protect against growth of bacteria and other impurities in portable unit.
200-013R Two wheel hand cart for transporting and storing unit.

Our Price: $1,460.91
Guardian G1540HTR 16 Gallon Portable Eye Wash Unit with Heat Traced Jacket Guardian G1540HTR 16 Gallon Portable Eye Wash Unit with Heat Traced Jacket

Guardian G1540HTR Aquaguard Sixteen Gallon Gravity Operated Portable Eye Wash With Heated Orange Insulation Jacket


  • Application: Self-contained, heated 16 gallon gravity flow eyewash unit uses gravity to deliver water through dual spray heads. Unit delivers over eight gallons (30 liters) of water for fifteen minutes, thus complying with the provisions of ANSI Z358.1-2009 for eyewashes. Unit is heated and insulated to endure sustained low or freezing temperatures over long periods of time. Unit is fully freeze-resistant, and tempered, for both in-door and out-door environments. Unit is ideal for use where a continuous supply of potable water is not available, especially in remote plant areas, low traffic and/or low hazard areas.
  • Tank And Jacket: 16 gallon capacity safety green polyethylene tank. Tank has built-in carrying handle, heavy wall construction and reinforced ribs to support weight of unit. Highly visible orange Deiner Nylon insulation jacket is waterproof, mildew resistant, easily cleaned, quick drying, abrasion resistant and has excellent strength. Activation is easy with the nylon pull down strap that is secured in place by Velcro strips.
  • Heating Pads: Heating pads are made of silicone rubber and are attached with pressure sensitive adhesive. The total amp draw of the unit is 4A and delivers 410 Watts of power, which allows the unit to operate to temperatures as low as -20° F.
  • Electronic Temperature Controller: The electronic temperature controller has an easy to read LCD screen for viewing the temperature and a green LED status indication light to let the user know when the heating pads are activated. The controller is factory set at 80° F and has a keypad lockout feature.
  • Ground Fault Plug: Unit comes standard with a highly visible yellow 15A GFCI Ground Fault-Manual Reset connected to a 9 foot long cord.
  • Spray Head Assembly: Water flow is activated by pulling down on bright yellow eyewash tray. Integral full flow nozzles deliver soft spray of water. Swing tray up to storage position to stop flow.
  • Drain: Waste water is directed into drain opening in tank basin. 3 ft. long drain hose in basin directs discharge into floor drain, storage tank or other receptor.
  • Mounting: Furnished with zinc coated steel bracket for mounting unit on wall. Unit can also be placed on countertop or other flat surface.
  • Preparation: Top operate unit, fill unit with clean potable water and add bacteriostatic additive (supplied with unit). Additive protects against growth of bacteria, fungus, algae and acanthamoeba. Unit should be inspected regularly and water in unit should be changed at least once every six months.
  • Discharge Time: Eyewash delivers .5 gallons per minute for 15 minutes.
  • Weight: 19 lbs. (8.6 kg.) empty, 164 lbs. (74 kg.) full.
  • Quality Assurance: Unit is completely assembled, and electrically and water tested prior to shipment.pletely assembled and water tested prior to shipment.

AVAILABLE OPTIONS
  • G1540BA 8 oz. bottle of bacteriostatic additive to protect against growth of bacteria, fungus, algae, and acanthamoeba.

Our Price: $1,534.55